PLANETARY GP-TRANSMISSION 8E9034 - Caterpillar

Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g00843907
Illustration 2 g00843908
Attach a suitable lifting device to hydraulic tank (9). Install hydraulic tank (9) to the original location.
The weight of hydraulic tank (9) is approximately 88 kg (195 lb).
Install mounting bolts (11) on hydraulic tank (9) .
Illustration 3 g00843905
Install bolts (10) on hydraulic tank (9) .
Illustration 4 g00843904
Install hose (8) on hydraulic tank (9). Tighten hose clamp (7) .
Illustration 5 g00843902
Install filter housing (2) on the hydraulic tank. Install hose assembly (6) to filter housing (2) .
Illustration 6 g00843901
Install nuts (1) on filter housing (2). Connect electrical connector (4). Install tube assembly (5) and hose assembly (3) .
Fill the hydraulic oil tank. Refer to Operation and Maintenance Manual, SEBU7299, "Hydraulic System Oil - Change" for the correct procedure.