PLATE, RETAINER 02001572 - Caterpillar

Insert two plates (5) into bracket (6) .
Illustration 9 g01111427
(6) Bracket (7) Fender (8) Bolt (9) Bolt (10) Washer (11) Plate
Use the following parts in order to install fender (7) to bracket (6) : two bolts (8), two bolts (9), four washers (10) and plate (11).
Illustration 10 g01113939
(5) Plate (10) Washers (11) Plate (12) Cover (13) Bolts
Use four bolts (13) and four washers (10) to install cover (12) to plate (5) .
Illustration 11 g01111446
(5) Plates (14) Bracket
Insert three plates (5) into bracket (14) .Note: Bracket (14) should be assembled so that the reflector is pointed to the rear of the Motor Grader. Refer to the arrow in figure 11.
Illustration 12 g01113950
(8) Bolt (9) Bolt (10) Washer (14) Bracket (15) Fender (16) Plate
Use the following parts to install fender (15) to bracket (14) : three bolts (8), two bolts (9), five washers (10) and plate (16) .
Illustration 13 g01113958
(5) Plate (10) Washers (13) Bolts (16) Plate (17) Cover
Use six bolts (13) and six washers (10) to install cover (17) to plates (5) .
Illustration 14 g01113960
Outside of fender (15) (9) Bolt (15) Fender (18) Flap (19) Washer (20) Plate
Illustration 15 g01111506
Inside of fender (15) (9) Bolt (15) Fender (18) Flap (21) Plate
Use the following parts to install flap (18) to fender (15) : three bolts (9), three washers (19), plate (20) and plate (21)
Illustration 16 g01111677
(1) Support (5) Plate (8) Bolt (9) Bolt (10) Washers (12) Cover
Use the following parts to install plate (5) that is attached to fender (7) to support (1) : four bolts (8), bolt (9) and five washers (10) .
Illustration 17 g01111683
(4) Support (5) Plate (8) Bolt (10) Washers (17) Cover
Illustration 18 g01111689
(4) Support (5) Plate (8) Bolt (9) Bolt (10) Washers (15) Fender (17) Cover
Use the following parts to install plate (5) that is attached to fender (15) to support (4) : six bolts (8), bolt (9) and seven washers (10)
Illustration 19 g01111695
Completed fenders on the right hand side of Motor Grader (7) Fender (15) FenderAssembly Procedure for Fenders on Left Hand Side of Motor Grader
Repeat step 1 through step 15 in ""Assembly Procedure for Fenders on Right Hand Side of Motor Grader"".
Illustration 20 g01111702
Completed fenders on the left hand side of Motor Grader (7) Fender (15) Fender