PLATE 0375033 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1 Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove".
Remove the crankshaft front seal. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove".
Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove".
Remove the speed/timing sensors. Refer to Disassembly and Assembly, "Speed/Timing Sensor - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00553958
Remove bolts (2) and retainer plate (3).
Remove gear (1).
Illustration 2 g00553982
Attach Tooling (A) and a suitable lifting device to front housing (4). The weight of front housing (4) is approximately 34 kg (75 lb).
Remove nut (6).
Remove bolts (5).
Remove front housing (4) and the gasket.