PLATE-CAM 0874628 - Caterpillar

Navigate through the OMM to find the topic of choice. Press the "Home" button to return to the main screen.Note: Contact your Cat Dealer for information to update the electronic OMM.Coaching Videos
The Coaching Videos screen allows the operator to watch coaching videos for proper machine operation.
Illustration 123 g06261341From the main screen, press the application menu button. In the Application menu, select "Setting". Next, select "Information" and then "Coaching Videos".
Illustration 124 g06241531Select the video you wish to view. Once finished, press the "Home" button to return to the main screen.Function List Screen
Illustration 125 g06213511Press the Function List icon to access the Function List screen.
Illustration 126 g06336871The Function List screen allows the user to turn on or off the available functions on the machine. Tap or select with the jog dial the item to turn on or off.Lift Assist
Lift Assist lets the operator see on the monitor actual load and safe working load of each machine position. For more information on the operation of this feature, refer to Operation and Maintenance Manual , Lift Assist.Crane
The shovel crane option provides a lifting hook that is attached to the bucket linkage. For more information on the operation of this feature refer to Operation and Maintenance Manual, Shovel Crane Control.Overload Warning
In lifting applications, the overload warning device activates a buzzer when there is an unstable load condition. When the buzzer sounds, the bucket load should be reduced or the stick should be moved inward.Auto Warm Up
The auto warm-up feature is a convenient way to make sure that the machine component temperatures are optimum for machine operation. More settings are located in Settings, Machine Settings, Auto Warm Up screen.AEC
When enabled, the Automatic Engine Speed Control (AEC) automatically reduces engine speed when the machine is inactive. The AEC system is designed to reduce fuel consumption and noise. Lower engine speeds can also increase engine life.The engine rpm will recover automatically to the setting of the engine speed dial when any hydraulic function is activated.
Table 2
AEC State Position of Manual Low Idle Switch Description of Mode
Disabled OFF The electronic controller automatically reduces engine speed by 100 rpm after there has been no hydraulic demand for a set amount of time. The default time setting is 5 seconds.
Enabled OFF The electronic controller will automatically reduce the engine rpm after there has been no hydraulic demand for a set amount of time. The default time setting is 5 seconds.Approximate engine rpm: 320 GC - 950 rpm, All models except 320 GC - 1000 rpm.
Enabled or Disabled ON The engine speed is reduced. Approximate engine rpm: 320 GC - 950 rpm, All models except 320 GC - 1000 rpm. Note: The position of the engine speed dial has no relevance on the actions described in Table 2.Heavy Lift
This work mode increases the relief pressure in the hydraulic circuit, which increases the hydraulic force that is available for lifting operations. The cylinder speed is slower when this mode is selected.Note: During normal excavation work, the heavy lift control must be in the OFF position.
If