AVSPARE.COM
parts catalog

PLATE ENG HOOD 0878036 - Caterpillar



0878036 PLATE ENG HOOD Caterpillar parts PLATE
Rating:
31
Alternative (cross code) number:
CA0878036
087-8036
0878036
Caterpillar 0878036 PLATE ENG HOOD

Buy PLATE ENG HOOD 0878036 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Removal Procedure
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Open the left side access panel.
Turn the battery disconnect switch to the OFF position.
Drain the hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct draining and filling procedures.
Illustration 1 g06260360
Disconnect hose assembly (1), hose assembly (3), and hose assembly (4) from control valve (auxiliary) (2).
Illustration 2 g06260375
Disconnect hose assembly (6) from control valve (auxiliary) (2) and brake pump (5).
Illustration 3 g06260376
Cut the cable straps and disconnect harness assembly (7).
Position harness assembly (7) out of the way.
Illustration 4 g06260379
Disconnect hose assemblies (8), hose assemblies (9), and hose assemblies (10) from control valve (auxiliary) (2).
Illustration 5 g06260380
Disconnect hose assembly (11) from control valve (auxiliary) (2).
Illustration 6 g02460362
Use two people to remove control valve (auxiliary) (2). The weight of control valve (auxiliary) (2) is approximately 12 kg (26 lb).
Remove bolts (12), bracket (13), and control valve (auxiliary) (2).Installation Procedure
Install control valve (auxiliary) (2) in the reverse order of removal.


Parts plate Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.