PLATE 0989367 - Caterpillar

Install lower bearing (16) .
Illustration 4 g00693088
Use a press and Tooling (A) in order to install seal (15) into the output side of the gearbox. Ensure that the seal face is flush with the face of the hub.
Illustration 5 g00691947
Install housing (14) .
Illustration 6 g00691937
Install upper bearing (13) .
Illustration 7 g00691930
Use Tooling (B) to install retaining ring (12) into the groove.
Illustration 8 g00691924
Install shaft (11) .
Illustration 9 g00683276
Apply a continuous bead of 3S-6252 Sealant to the ring gear (5). Apply the sealant to the side that will be mounted to the housing.
Illustration 10 g00691914
Install ring gear (5) to the hub.
Illustration 11 g00691900
Install the twelve bolts (10) .
Illustration 12 g00691885
Install the lower carrier and planetary gear (9) .
Illustration 13 g00691874
Install the upper carrier and planetary gear (8) .
Illustration 14 g00691871
Install sun gear (7) .
Illustration 15 g00691866
Install thrust washer (6) .
Illustration 16 g00691842
Apply a continuous bead of 3S-6252 Sealant to the ring gear (5) .
Align the cover plate (4) with ring gear (5) .
Install the eight bolts (3) for the cover plate (4) .
Illustration 17 g00745391
Fill planetary (1) with oil. Maintain the oil level to the bottom of the threads of filler plug (2) when the hole is horizontal. Refer to Operation and Maintenance Manual, SEBU7306, "Lubricant Viscosities" and refer to Operation and Maintenance Manual, SEBU7306, "Refill Capacities".End By: Install the planer planetary. Refer to Service Manual, "Planer Planetary - Install".