PLATE 1005299 - Caterpillar

Press the "End Delay" button on the touchscreen.This action will end the delay. Information for the delay will be sent to the office.Changing the Delay Time
If the delay is different from the default duration, and before applying the delay, perform the following procedure to change the duration:
Illustration 7 g02157178
Changing the default delay time (3) Arrow for shortening the delay (4) Arrow for extending the delay
Highlight the desired delay in the "Select Delay" window and then press the appropriate arrow buttons.
Continue pressing the arrow buttons until the desired time is reached.Shortening the delay will shorten the delay time by 2 minute increments. Extending the delay will extend the delay time by 2 minute increments.
Press "OK" to accept the delay time. The counter for the delay will begin.Note: The "Select Delay" window may also be configured not to display the time adjustment arrow buttons. This feature ensures that the default delay time is always used.Displaying the Current Delay
If a delay is in progress when the "Select Delay" window is displayed, the current information for the delay will be displayed. The current delay does not show the countdown. The current button in the "Select Delay" window is pressed to refresh the delay in progress information.Entering Checklist Information
Checklist - This button may be configured to appear on the toolbar of the monitor display group. Press this button to enter checklist information. Perform the following procedure to view the checklist:
Press the checklist button on the monitor display group.The "Select Items Requiring Action" window will appear.
Illustration 8 g02157333
"Select Items Requiring Action" window
Select the items that require attention. The selected items will be highlighted. Or press the "Cancel" button if no items require action.
Press "OK" to send the information to the office.A message will be sent to the office that indicates that the selected items require action.
Illustration 9 g02730508
Advanced check list windowThe checklist may be configured to display automatically after operator login.An advanced checklist may be configured to display instead of the "Select Items Requiring Action" window. The advanced checklist provides the following additional buttons: "BO" and "Send". Each item in the list must be verified. Then, each item must be selected as pass or fail before continuing. A list item is highlighted and then selected as either "BO" for broken or "OK". Once each item has been validated, press the "Send" button. Refer to Illustration 9.Note: All items in the checklist must be selected either "BO" or "OK" before the system will proceed with completing the operator log on.Note: The checklist window may also be configured not to display the "Cancel" button. This feature ensures that the checklist is processed before operating the machine.Messages
Responding to Messages
As an alternative to using voice radio, office personnel can communicate with machine operators by sending messages to the monitor display group. Messages can also be configured to sound the alarm on the monitor display group until the operator responds to the message.Perform the following procedure to respond to a message:
Use the touchscreen or press the tab button on the monitor display