1063469 PLATE Caterpillar parts
8 FT, BG-225B
Rating:
Alternative (cross code) number:
CA1063469
106-3469
1063469
CA1063469
106-3469
1063469
Weight: 0.70 pounds 0 kg.
ASPHALT PAVER, ASPHALT SCREED,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$98.70
02 Aug 2020
-: -
CROSBY 7.5T H-RNG NUT ONLY HRN500 (1063469)
Number on catalog scheme:
3
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 418-4568 Mobile Lift Cart 1
High hydraulic pressure hazard. This machine will not automatically release hydraulic oil pressure from the hydraulic system after the engine has been stopped. Hydraulic system pressure will not be released by use of operator controls. Hydraulic oil pressure can remain in the system for a time after the engine has stopped. Personal injury or death may result from the release of hydraulic oil pressure, the release of hot oil, or parts separating with force if proper care is not used during the disassembly. Use extreme caution at all times when servicing this machine or any of the components.Park the machine on a level surface and lower all implements to the ground. Sudden movement of the machine or the release of oil under pressure can cause injury or death to persons on or near the machine. Allow all fluids to cool prior to performing any service work. Take appropriate precautions to ensure safety from any remaining pressure.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct draining and filling procedures.
Illustration 1 g03179339
Remove cover (1) .
Illustration 2 g03179399
Disconnect hose assemblies (2) and tube assemblies (3) .
Illustration 3 g03179417
Disconnect ground strap (4) .
Illustration 4 g03179419
Disconnect harness assemblies (5) .
Illustration 5 g03179420
Disconnect harness assemblies (6) .
Illustration 6 g03182578
Remove bolts (7) .
Illustration 7 g03182599
Remove bolts (8) .
Illustration 8 g03182600
Slide control valve (9) onto Tooling (A) .Installation Procedure
Install valve (9) in the reverse order of removal.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 418-4568 Mobile Lift Cart 1
High hydraulic pressure hazard. This machine will not automatically release hydraulic oil pressure from the hydraulic system after the engine has been stopped. Hydraulic system pressure will not be released by use of operator controls. Hydraulic oil pressure can remain in the system for a time after the engine has stopped. Personal injury or death may result from the release of hydraulic oil pressure, the release of hot oil, or parts separating with force if proper care is not used during the disassembly. Use extreme caution at all times when servicing this machine or any of the components.Park the machine on a level surface and lower all implements to the ground. Sudden movement of the machine or the release of oil under pressure can cause injury or death to persons on or near the machine. Allow all fluids to cool prior to performing any service work. Take appropriate precautions to ensure safety from any remaining pressure.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct draining and filling procedures.
Illustration 1 g03179339
Remove cover (1) .
Illustration 2 g03179399
Disconnect hose assemblies (2) and tube assemblies (3) .
Illustration 3 g03179417
Disconnect ground strap (4) .
Illustration 4 g03179419
Disconnect harness assemblies (5) .
Illustration 5 g03179420
Disconnect harness assemblies (6) .
Illustration 6 g03182578
Remove bolts (7) .
Illustration 7 g03182599
Remove bolts (8) .
Illustration 8 g03182600
Slide control valve (9) onto Tooling (A) .Installation Procedure
Install valve (9) in the reverse order of removal.
Caterpillar parts catalog:
Parts plate Caterpillar catalog:
1043664
PLATE
10 FT, 10-20B, 8 FT, 8-16B
10 FT, 10-20B, 8 FT, 8-16B
1043663
PLATE
10 FT, 10-20B, 8 FT, 8-16B
10 FT, 10-20B, 8 FT, 8-16B
1044714
PLATE
10 FT, 10-20B, 10B, 8 FT, 8-16B, BG-225B, BG-2455C
10 FT, 10-20B, 10B, 8 FT, 8-16B, BG-225B, BG-2455C
1164603
PLATE
10 FT, 10-20B, 8 FT, 8-16B, AP-800C, AS2251, AS2301, AS2302, BG-225B
10 FT, 10-20B, 8 FT, 8-16B, AP-800C, AS2251, AS2301, AS2302, BG-225B
1063475
PLATE
8 FT
8 FT
1058629
PLATE
10-20B, 8 FT, 8-16B
10-20B, 8 FT, 8-16B
8I0332
PLATE-MOUNTING
10 FT, 10-20B, 8 FT, 8-16B, AP-1055D, AP-655C, AS3251C, AS3301C, BG-2455D, BG-260D
10 FT, 10-20B, 8 FT, 8-16B, AP-1055D, AP-655C, AS3251C, AS3301C, BG-2455D, BG-260D
1247354
PLATE AS
8 FT, 8-16B, AP-655C
8 FT, 8-16B, AP-655C
1247352
PLATE AS
8 FT, 8-16B, AP-655C
8 FT, 8-16B, AP-655C
1127971
PLATE
10 FT, 10-20B, 8 FT, 8-16B
10 FT, 10-20B, 8 FT, 8-16B
1127973
PLATE
10 FT, 10-20B, 8 FT, 8-16B
10 FT, 10-20B, 8 FT, 8-16B
1063471
PLATE
8 FT, BG-225B
8 FT, BG-225B