PLATE AS 1096967 - Caterpillar

Illustration 1 g03346196
Left side view of engine
Table 1
Specification for 247-8505 Auxiliary Sea Water Pump Gp and 307-8939 Auxiliary Sea Water Pump Gp
Item Qty Part Specification Description
1 2 3N-8468 Clamp As Use the following procedure in order to tighten the clamp assembly:
1. After installation of elbows, tighten each bolt of clamp assembly to 10 3 N m (89 27 lb in).
2. Again, final tighten each bolt to 18.5 1.5 N m (163.7 13.3 lb in).
Illustration 2 g03346198
Table 2
Item Qty Part Specification Description
2 2 238-9932 Bearing Before installation, bore in the bearing for the shaft is 24.996 0.005 mm (0.9841 0.0002 inch).
3 1 348-5426 Shaft Diameter (B) of the new shaft is 25.000 mm (0.9843 inch).
4 1 109-5322 Wear Plate Thickness of the new wear plate is 1.5 mm (0.06 inch).
5 1 109-5323 Washer Thickness of the new washer is 1.22 mm (0.048 inch).