1119778 PLATE AS Caterpillar parts
315, 317, 322 FM L, 330, 350, 375 L
Rating:
Alternative (cross code) number:
CA1119778
111-9778
1119778
CA1119778
111-9778
1119778
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
New Starter Solenoid 12V for Delco 30/35MT Series Fits Starters: 2958166 1113218 323-717 44-4694 91-01-3785 1113172 267904C91 323-705 44-0657 91-01-3781 1113198 44-4373 44-4568 91-01-4033 1113206
Gladiator Meets or exceeds OEM specifications || One year Warranty! || HI Heat Cap!
Gladiator Meets or exceeds OEM specifications || One year Warranty! || HI Heat Cap!
New Starter Solenoid 12V for Delco 30/35MT Series Fits Starters: 2958166 1113218 323-717 44-4694 91-01-3785 1113172 267904C91 323-705 44-0657 91-01-3781 1113198 44-4373 44-4568 91-01-4033 1113206
Gladiator Meets or exceeds OEM specifications || One year Warranty! || HI Heat Cap!
Gladiator Meets or exceeds OEM specifications || One year Warranty! || HI Heat Cap!
Total Power Parts 245-12121 Solenoid Compatible With/Replacement For Delco 1115501, 1115508, 1115510, 1115521, 1115529, 1115531, 1115540, 1115582, 1119778, 1119833, 1119842, 1119859, 1119877
Total Power Parts 30-DAY RETURN POLICY/1-YEAR WARRANTY: If your order arrives and it’s not exactly what you want, you may return it within 30 days for a refund. We know that people sometimes order a part and then discover it’s not exactly the one they need for the repair. We understand and want to work with you. Just make sure the item is in its original packaging and in good condition free of damage. Outside of 30-days, we will replace it anytime within one year of your order. || Specs: Solenoid, Voltage: 12 || RELIABLE FITMENT: Please verify this is the right part number before ordering. We pride ourselves in providing reliable fitment data so you can find the right part to get the job done. If you believe we have an error, we would be grateful for your feedback. || Replaces OEM Numbers: Accumax: 10A-D951W, 10A-DE951L, Accurate: 7-951, Arrowhead: SDR6003, Arrowhead (OEM): 10A-D951L, 10A-DE951L, Arrowhead (OEM) (OLD): 10A-D951W, Cargo: 130500, Caterpillar: 3210507, 321507, Delco: 1115501, 1115508, 1115510, 1115521, 1115529, 1115531, 1115540, 1115582, 1119778, 1119833, 1119842, 1119859, 1119877, 1119882, 1119883, 1119885, 1119890, 1119906, 1119935, D954, D959, D970, D971, D980, D985, INTL Harvester: 104288A1R, 65479C2
Total Power Parts 30-DAY RETURN POLICY/1-YEAR WARRANTY: If your order arrives and it’s not exactly what you want, you may return it within 30 days for a refund. We know that people sometimes order a part and then discover it’s not exactly the one they need for the repair. We understand and want to work with you. Just make sure the item is in its original packaging and in good condition free of damage. Outside of 30-days, we will replace it anytime within one year of your order. || Specs: Solenoid, Voltage: 12 || RELIABLE FITMENT: Please verify this is the right part number before ordering. We pride ourselves in providing reliable fitment data so you can find the right part to get the job done. If you believe we have an error, we would be grateful for your feedback. || Replaces OEM Numbers: Accumax: 10A-D951W, 10A-DE951L, Accurate: 7-951, Arrowhead: SDR6003, Arrowhead (OEM): 10A-D951L, 10A-DE951L, Arrowhead (OEM) (OLD): 10A-D951W, Cargo: 130500, Caterpillar: 3210507, 321507, Delco: 1115501, 1115508, 1115510, 1115521, 1115529, 1115531, 1115540, 1115582, 1119778, 1119833, 1119842, 1119859, 1119877, 1119882, 1119883, 1119885, 1119890, 1119906, 1119935, D954, D959, D970, D971, D980, D985, INTL Harvester: 104288A1R, 65479C2
Number on catalog scheme:
42
For full view, you need register
Information:
The following ball bearings must be lubricated: no shield and single shield. Double shielded ball bearings may not require lubrication. Refer to the instructions that are located on the machine.For ball bearings, use Caterpillar 2S-3230 Bearing Lubricant. This grease is an NLGI No. 2 Grade. There is Polyurea (a thickener) in this grease. The temperature range of Caterpillar 2S-3230 Bearing Lubricant is −29 °C (−20.2 °F) to 177 °C (350.6 °F). For extremely low temperatures, use either NLGI No. 1 Grade or NLGI No. 0 Grade.Lubricating Process
Remove either the louver assembly or the rear plate from the rear of the generator housing.
Remove the top grease pipe plug and remove the lower grease pipe plug.
Install a grease fitting in the grease pipe.
Grease the shielded ball bearings with 2S-3230 Bearing Lubricant ( 53.28 mL (1.8 ounces) to 59.20 mL (2.0 ounces)). Lubricate shielded ball bearings at 2000 hour intervals. Do not mix greases. Note: Some two-bearing generators have spherical roller bearings in the front bracket and ball bearings in the rear bracket. These units should use a common 108-8611 Grease Cartridge. This grease should be used for the front bearing and the rear bearing.
Wipe off the excess grease. Remove the top grease fitting. Install the plug.
Operate the generator for one hour. This will allow the grease to expand. The expanding grease will force the excess grease from the cavity. When the excess grease is forced from the cavity, the internal pressure will be reduced. The generator should continue to operate until the grease stops purging.
Stop the engine. Install the plug in the bottom grease pipe. Wipe off the excess grease.
Install the louver assembly or install the rear plate.
Remove either the louver assembly or the rear plate from the rear of the generator housing.
Remove the top grease pipe plug and remove the lower grease pipe plug.
Install a grease fitting in the grease pipe.
Grease the shielded ball bearings with 2S-3230 Bearing Lubricant ( 53.28 mL (1.8 ounces) to 59.20 mL (2.0 ounces)). Lubricate shielded ball bearings at 2000 hour intervals. Do not mix greases. Note: Some two-bearing generators have spherical roller bearings in the front bracket and ball bearings in the rear bracket. These units should use a common 108-8611 Grease Cartridge. This grease should be used for the front bearing and the rear bearing.
Wipe off the excess grease. Remove the top grease fitting. Install the plug.
Operate the generator for one hour. This will allow the grease to expand. The expanding grease will force the excess grease from the cavity. When the excess grease is forced from the cavity, the internal pressure will be reduced. The generator should continue to operate until the grease stops purging.
Stop the engine. Install the plug in the bottom grease pipe. Wipe off the excess grease.
Install the louver assembly or install the rear plate.
Caterpillar parts catalog:
Parts plate Caterpillar catalog:
1186748
PLATE
307, 315, 317
307, 315, 317
4K4345
PLATE
235, 235B, 245, 245B, 245D, 315, 315B L, 315C, 317, 317B LN, 318B, 318C, 319C, 320 L, 320B, 320C, 322 LN, 322B LN, 325 L, 325B L, 325C, 330 L, 330B L, 345B II, 966C, 966D, 966F, 973, 973C, 973D, 977L,...
235, 235B, 245, 245B, 245D, 315, 315B L, 315C, 317, 317B LN, 318B, 318C, 319C, 320 L, 320B, 320C, 322 LN, 322B LN, 325 L, 325B L, 325C, 330 L, 330B L, 345B II, 966C, 966D, 966F, 973, 973C, 973D, 977L,...
315, 315B, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B FM LL, 320B U, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM ...
1495834
PLATE
307, 312B L, 315, 315B L, 317, 317B LN, 318B
307, 312B L, 315, 315B L, 317, 317B LN, 318B
1331340
PLATE AS
315, 317
315, 317
1087178
PLATE
312B L, 315, 315B, 315B L, 315C, 317, 317B LN, 318B
312B L, 315, 315B, 315B L, 315C, 317, 317B LN, 318B
1335401
PLATE
M312, M313C, M313D, M315, M315C, M315D, M316C, M316D, M318
M312, M313C, M313D, M315, M315C, M315D, M316C, M316D, M318
1327324
PLATE AS
M312, M315, M318
M312, M315, M318
1309367
PLATE
M312, M315, M318
M312, M315, M318
1309366
PLATE
M312, M315, M318
M312, M315, M318
1308925
PLATE
M312, M315, M318
M312, M315, M318
5W5875
PLATE
205, 206, 212, M312, M315, M318, M320
205, 206, 212, M312, M315, M318, M320