PLATE-WARNING 1122137 - Caterpillar

Illustration 1 g01520718
(1) 087-5533 Sleeve Bearing Inside diameter ... 90.27 0.02 mm (3.554 0.001 inch) Outside diameter ... 106.200 0.013 mm (4.1811 0.0005 inch) Installation depth of the sleeve bearing ... 10.0 0.3 mm (0.39 0.01 inch)Note: Apply 248-7522 Hydraulic Oil to the face and the threads of the special locknut all around before assembly. (2) Torque for the special locknut ... 13500 700 N m (9960 520 lb ft) (3) Lubricate the inside diameter and the outside diameter of two rings with clean grease. (4) Lubricate the inside diameter and the outside diameter of the seal with clean grease. (A) Bore of the cylinder assembly ... 160.00 0.10 mm (6.299 0.004 inch) (B) Diameter of the rod ... 109.930 0.030 mm (4.3279 0.0012 inch) (C) Bore of the head over two lands ... 110.63 0.03 mm (4.356 0.001 inch) (5) 087-5548 Sleeve Bearing Inside diameter ... 100.29 0.02 mm (3.948 0.001 inch) Outside diameter ... 116.230 0.013 mm (4.5760 0.0005 inch) Installation depth of the sleeve bearing ... 10.0 0.3 mm (0.39 0.01 inch) (6) Lubricate the sealing lip of the buffer seal lightly with the lubricant that is being sealed. (7) Lubricate the sealing lip of the U-cup seal lightly with the lubricant that is being sealed. (8) Lubricate the sealing lip of the lip type seal lightly with the lubricant that is being sealed. (9) Apply 4C-4032 Bearing Mount Compound to the wiper seal groove before assembly.