PLATE 1125853 - Caterpillar

Illustration 1 g03890199
Table 1
Specification for 389-4607 Cylinder Mounting Gp
Item Qty Part Specification Description
1 2 3E-8011 Bolt Apply Loctite C5A copper anti seize to the threads of the bolt.
Tighten the bolt to 1800 200 N m (1328 148 lb ft). Tap the joint until the torque drops lower than 950 N m (701 lb ft). Again, tighten the bolt to 1800 200 N m (1328 148 lb ft). Apply a second impact until the torque drops to less than 1600 N m (1180 lb ft). Once again, tighten the bolt to 1800 200 N m (1328 148 lb ft).
Torque the bolt to 1800 200 N m (1328 148 lb ft) after 50 hours of vehicle operation.
2 4 245-3251 Collet Before assembly, outer diameter, inner diameter, and mating surfaces to be clean. Apply Loctite C5A copper anti seize to the outer diameter and inner diameter of the collet.
3 4 9X-7703 Lip Type Seal Before assembly apply red Loctite 263 .
4 2 245-1558 Pin Measure the distance on both sides of the installed pin and position pin evenly on both sides.