1127973 PLATE Caterpillar parts
10 FT, 10-20B, 8 FT, 8-16B
Rating:
Alternative (cross code) number:
CA1127973
112-7973
1127973
CA1127973
112-7973
1127973
Weight: 0.70 pounds 0 kg.
ASPHALT SCREED,
Number on catalog scheme:
3
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Puller (Two Legged) 1
B - E10 Torx Socket
1/4" Square Drive 1 Start By:
Remove the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection Pump - Remove" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01970674
Use a suitable tool in order to prevent fuel injection pump gear (3) from rotating. Note: Do not use timing pin for the fuel injection in order to prevent the fuel injection pump gear from rotating.
Remove nut (1) and washer (2).
Use Tooling (A) in order to remove gear (3) from the shaft of fuel injection pump (7).
Remove key (6) from the shaft of fuel injection pump (7).
Use Tooling (B) in order to remove Torx screws (8) and washers.
Remove adapter plate (4) from fuel injection pump (7).
Remove O-ring seal (5).
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Puller (Two Legged) 1
B - E10 Torx Socket
1/4" Square Drive 1 Start By:
Remove the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection Pump - Remove" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01970674
Use a suitable tool in order to prevent fuel injection pump gear (3) from rotating. Note: Do not use timing pin for the fuel injection in order to prevent the fuel injection pump gear from rotating.
Remove nut (1) and washer (2).
Use Tooling (A) in order to remove gear (3) from the shaft of fuel injection pump (7).
Remove key (6) from the shaft of fuel injection pump (7).
Use Tooling (B) in order to remove Torx screws (8) and washers.
Remove adapter plate (4) from fuel injection pump (7).
Remove O-ring seal (5).
Caterpillar parts catalog:
Parts plate Caterpillar catalog:
1063471
PLATE
8 FT, BG-225B
8 FT, BG-225B
1063469
PLATE
8 FT, BG-225B
8 FT, BG-225B
1043664
PLATE
10 FT, 10-20B, 8 FT, 8-16B
10 FT, 10-20B, 8 FT, 8-16B
1043663
PLATE
10 FT, 10-20B, 8 FT, 8-16B
10 FT, 10-20B, 8 FT, 8-16B
1044714
PLATE
10 FT, 10-20B, 10B, 8 FT, 8-16B, BG-225B, BG-2455C
10 FT, 10-20B, 10B, 8 FT, 8-16B, BG-225B, BG-2455C
1164603
PLATE
10 FT, 10-20B, 8 FT, 8-16B, AP-800C, AS2251, AS2301, AS2302, BG-225B
10 FT, 10-20B, 8 FT, 8-16B, AP-800C, AS2251, AS2301, AS2302, BG-225B
8I0298
PLATE AS
8 FT, 8-16B, AP-655C, AS3251C
8 FT, 8-16B, AP-655C, AS3251C
8I0299
PLATE AS
8 FT, 8-16B, AP-655C, AS3251C
8 FT, 8-16B, AP-655C, AS3251C
8I0332
PLATE-MOUNTING
10 FT, 10-20B, 8 FT, 8-16B, AP-1055D, AP-655C, AS3251C, AS3301C, BG-2455D, BG-260D
10 FT, 10-20B, 8 FT, 8-16B, AP-1055D, AP-655C, AS3251C, AS3301C, BG-2455D, BG-260D
1247354
PLATE AS
8 FT, 8-16B, AP-655C
8 FT, 8-16B, AP-655C
1247352
PLATE AS
8 FT, 8-16B, AP-655C
8 FT, 8-16B, AP-655C
1127971
PLATE
10 FT, 10-20B, 8 FT, 8-16B
10 FT, 10-20B, 8 FT, 8-16B