1128702 PLATE-CLUTCH Caterpillar parts
35, 45, 55
Rating:
Alternative (cross code) number:
CA1128702
112-8702
1128702
CA1128702
112-8702
1128702
Weight: 0.35 pounds 0 kg.
CHALLENGER,
Number on catalog scheme:
27
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Remove ".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01254108
Support crankshaft (1) on a suitable stand.
Remove allen head screws (2) from crankshaft timing ring (3) . Do not reuse the allen head screws.
Carefully remove crankshaft timing ring (3) from crankshaft (1) . Do not reuse the crankshaft timing ring.Note: Ensure that seal surface (4) of the crankshaft is not damaged when the crankshaft timing ring is removed.Note: Do not remove dowel (5) from crankshaft (1) unless the dowel is damaged.Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 194-3541 4 mm Allen Socket 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Support crankshaft (1) on a suitable stand.
Ensure that the flange for the crankshaft timing ring on the crankshaft is clean and free from damage.
Illustration 2 g01254108
If dowel (5) was removed, install a new dowel to crankshaft (1) .
Position crankshaft timing ring (3) onto the crankshaft with the teeth toward rear seal surface (4) . Align the hole in crankshaft timing ring (3) with dowel (5) . Carefully install crankshaft timing ring (3) to crankshaft (1) .Note: Ensure that seal surface (4) on the crankshaft is not damaged when the crankshaft timing ring is installed.
Use Tooling (A) to install new allen head screws (2) . Tighten the allen head screws to a torque of 15 N m (133 lb in).End By: Install the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Install ".
Start By:
Remove the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Remove ".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01254108
Support crankshaft (1) on a suitable stand.
Remove allen head screws (2) from crankshaft timing ring (3) . Do not reuse the allen head screws.
Carefully remove crankshaft timing ring (3) from crankshaft (1) . Do not reuse the crankshaft timing ring.Note: Ensure that seal surface (4) of the crankshaft is not damaged when the crankshaft timing ring is removed.Note: Do not remove dowel (5) from crankshaft (1) unless the dowel is damaged.Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 194-3541 4 mm Allen Socket 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Support crankshaft (1) on a suitable stand.
Ensure that the flange for the crankshaft timing ring on the crankshaft is clean and free from damage.
Illustration 2 g01254108
If dowel (5) was removed, install a new dowel to crankshaft (1) .
Position crankshaft timing ring (3) onto the crankshaft with the teeth toward rear seal surface (4) . Align the hole in crankshaft timing ring (3) with dowel (5) . Carefully install crankshaft timing ring (3) to crankshaft (1) .Note: Ensure that seal surface (4) on the crankshaft is not damaged when the crankshaft timing ring is installed.
Use Tooling (A) to install new allen head screws (2) . Tighten the allen head screws to a torque of 15 N m (133 lb in).End By: Install the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Install ".
Caterpillar parts catalog:
Parts plate Caterpillar catalog:
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 2290, 2390, 2...
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 1290T, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H NA, 214B, 224B, ...
120H, 120H ES, 120H NA, 135H, 135H NA, 213B, 214B, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446, 446B, 446D, 45, 525B, 533, 535B, 539,...
120H, 120H NA, 135H, 135H NA, 214B, 3114, 3116, 3126, 3176, 3176B, 320 L, 320B, 322 FM L, 322 LN, 325, 325 L, 325 LN, 325B, 325B L, 446, 446B, 446D, 45, 561M, 613C II, 918F, 924F, 928G, 938F, 950F, 95...
120H, 120H ES, 120H NA, 12H, 135H, 135H NA, 214B, 30/30, 3114, 3116, 3126, 3126B, 3126E, 3176, 3176B, 320 L, 320B, 322 FM L, 322 LN, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, ...
120H, 120H ES, 120H NA, 135H, 135H NA, 1673C, 205B, 211B, 214B, 229D, 235, 235B, 235C, 245, 245B, 245D, 24H, 3114, 3116, 3126, 3176, 3176B, 3176C, 320 L, 3208, 320B, 322 FM L, 322 LN, 325 L, 325 LN, 3...
1250464
PLATE
45, 55
45, 55
1083321
PLATE-LH
45, 55
45, 55
1118223
PLATE-PARKING BRAKE
35, 45, 55
35, 45, 55
1128705
PLATE
35, 45, 55
35, 45, 55
246D, 24M, 262D, 272D, 277D, 279D, 287D, 289D, 299D, 305.5E, 345D, 345D L, 345D L VG, 349D, 349D L, 35, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, ...
1535013
PLATE AS
35, 45, 55
35, 45, 55
1282427
PLATE
45, 55
45, 55
1515329
PLATE
45, 55
45, 55
1274650
PLATE AS
45, 55
45, 55
1135496
PLATE
35, 45, 55
35, 45, 55
1287071
PLATE-RETAINING
45, 55
45, 55
1287070
PLATE LENS
45, 55
45, 55
1180773
PLATE
35, 45, 55
35, 45, 55
1138684
PLATE
35, 45, 55
35, 45, 55
1411223
PLATE-WARNING-ROPS/FOPS
35, 45, 55
35, 45, 55
1138750
PLATE-IDENTIFICATION
35, 45, 55
35, 45, 55
35, 45, 55
1128705
PLATE
35, 45, 55
35, 45, 55