1137774 PLATE AS Caterpillar parts
CB-534B, CB-534C
Rating:
Alternative (cross code) number:
CA1137774
113-7774
1137774
CA1137774
113-7774
1137774
Weight: 2 pounds 0 kg.
VIBRATORY COMPACTOR,
Number on catalog scheme:
4
For full view, you need register
Information:
Disassembly Procedure
Start By:
Remove the pilot valve (joystick).
Illustration 1 g02154696
Illustration 2 g02154697
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove rubber boot (1).
Measure Dimension (X) from the top of plate (3) to the top of plate (5). Record Dimension (X) for assembly purposes.
Tighten nut (2) against plate (3). Remove plate (3), nut (2), and U-joint (4). Note: If U-joint (4) or plate (3) is not being replaced, do not remove plate (3) from U-joint (4).
Remove nut (2) from U-joint (4).
Remove plate (3) from U-joint (4).
Remove plate (5).
Illustration 3 g02154698Note: The spring seat and the spring may fall out of the rod while you remove the plug.Note: Mark the location of spring seat (11) for assembly purposes.
Remove plug (7).
Remove spring seat (11) and spring (10) from rod (9).
Remove rod (9) from plug (7).
Remove seal (6) from plug (7).
Remove O-ring seal (8) from plug (7).
Illustration 4 g02154699
Illustration 5 g02154700
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Note: Spool assembly (13) is installed in Port (1) and Port (3) in the pilot valve. Spool assembly (12) is installed in Port (2) and Port (4) in the pilot valve.
Remove spool assembly (12) and (13). Remove springs (14) and (15).
Use the following procedure to disassemble spool assembly (12). Note: Spool (12) is assembled in Port (2) and Port (4) in the pilot valve.
Apply pressure to seat (16) by hand. Put the end of the spool in the slotted opening of seat (16). Remove seat (16), spring (18), and washer (20) from spool (22).
Use the following procedure to disassemble spool assembly (13). Note: Spool (13) is assembled in Port (1) and Port (3) in the pilot valve.
Apply pressure to seat (17) by hand. Put the end of the spool in the slotted opening of seat (17). Remove seat (17), spring (19), and washer (21) from spool (23).
Start By:
Remove the pilot valve (joystick).
Illustration 1 g02154696
Illustration 2 g02154697
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove rubber boot (1).
Measure Dimension (X) from the top of plate (3) to the top of plate (5). Record Dimension (X) for assembly purposes.
Tighten nut (2) against plate (3). Remove plate (3), nut (2), and U-joint (4). Note: If U-joint (4) or plate (3) is not being replaced, do not remove plate (3) from U-joint (4).
Remove nut (2) from U-joint (4).
Remove plate (3) from U-joint (4).
Remove plate (5).
Illustration 3 g02154698Note: The spring seat and the spring may fall out of the rod while you remove the plug.Note: Mark the location of spring seat (11) for assembly purposes.
Remove plug (7).
Remove spring seat (11) and spring (10) from rod (9).
Remove rod (9) from plug (7).
Remove seal (6) from plug (7).
Remove O-ring seal (8) from plug (7).
Illustration 4 g02154699
Illustration 5 g02154700
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Note: Spool assembly (13) is installed in Port (1) and Port (3) in the pilot valve. Spool assembly (12) is installed in Port (2) and Port (4) in the pilot valve.
Remove spool assembly (12) and (13). Remove springs (14) and (15).
Use the following procedure to disassemble spool assembly (12). Note: Spool (12) is assembled in Port (2) and Port (4) in the pilot valve.
Apply pressure to seat (16) by hand. Put the end of the spool in the slotted opening of seat (16). Remove seat (16), spring (18), and washer (20) from spool (22).
Use the following procedure to disassemble spool assembly (13). Note: Spool (13) is assembled in Port (1) and Port (3) in the pilot valve.
Apply pressure to seat (17) by hand. Put the end of the spool in the slotted opening of seat (17). Remove seat (17), spring (19), and washer (21) from spool (23).
Caterpillar parts catalog:
Parts plate Caterpillar catalog:
1091375
PLATE
CB-534B, CB-534C, CB-535B
CB-534B, CB-534C, CB-535B
1091373
PLATE
CB-434B, CB-434C, CB-534B, CB-534C
CB-434B, CB-434C, CB-534B, CB-534C
1091378
PLATE
CB-534B
CB-534B
2396362
PLATE-COVER
10-20B, 8-16B, AP-1055D, AP-655C, AS3251C, AS3301C, BG-2455D, BG-260D
10-20B, 8-16B, AP-1055D, AP-655C, AS3251C, AS3301C, BG-2455D, BG-260D
1098136
PLATE
10 FT, 10-20B, 10B, 8 FT, 8-16B, BG-2455C
10 FT, 10-20B, 10B, 8 FT, 8-16B, BG-2455C
1317182
PLATE AS-DEFLECTOR
10 FT, 10B, 8 FT, 8-16B, AP-800C
10 FT, 10B, 8 FT, 8-16B, AP-800C
1069957
PLATE AS-DRIVE
CB-534B, CB-534C, CB-535B
CB-534B, CB-534C, CB-535B
1225828
PLATE AS
CB-534B, CB-534C, CB-535B, CS-431C
CB-534B, CB-534C, CB-535B, CS-431C
1430296
PLATE AS
CB-534B
CB-534B
1062427
PLATE
CB-534B, CB-634
CB-534B, CB-634
1246241
PLATE
CB-434B, CB-434C, CB-534B, CB-534C, CB-535B, CB-544, CB-545, PF-300C, PS-300B
CB-434B, CB-434C, CB-534B, CB-534C, CB-535B, CB-544, CB-545, PF-300C, PS-300B
1255148
PLATE
CB-534B, CB-534C
CB-534B, CB-534C