PLATE & FILM GP 1169464 - Caterpillar

Installation Procedure
Table 1
Required Tooling
Tool Part Number Part Description Qty
A 466-8747 Tool 1
B - Locktite® 270 1
Illustration 1 g06193578
Illustration 2 g06194348Note: The special operation "Set Right" of the bearing races does not require preload or backlash adjustment. Before assembling new components, check the indicated dimensions. (C) 17.975 0.025 mm (0.7077 0.0009 inch) (D) 64.360 0.025 mm (2.5339 0.0009 inch) (E) 23.122 0.050 mm (0.9103 0.0019 inch)
Illustration 3 g06193087
Illustration 4 g06193040
Illustration 5 g06194376
Illustration 6 g06194391
Illustration 7 g06194395Note: The bushings must be assembled with the shown orientation (notch downward). Do not overturn the bushings.
Illustration 8 g06194398
Illustration 9 g06194402
Illustration 10 g06194582
Illustration 11 g06194587End By:
Install the axle housing, axle shaft, and wheel flange.
Install the final drive planetary.