PLATE-TREAD 1196550 - Caterpillar

Assembly Procedure
Illustration 1 g06265653
Install screen (26). Install plate (27) and nut. Tighten nut (27) to a torque of 20 5 N m (177 44 lb in). Repeat for the second screen.
Illustration 2 g06265604
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spring guide (18) and spring (19). Install valve (20). Install seal (21). Install valve body (22).
Install seal (23) and plug (24). Install the washers and nuts (25).
Illustration 3 g06265561
Illustration 4 g06265399
Install O-ring seals (17). Install sight glass (16) into grommet (15). Install indicator plate (14). Install grommet (15). Install retainer (13) on cover (10). Install bolts (12).
Illustration 5 g06265386
Install new gasket (11).
Install cover (10), washers (9), and bolts (8).
Illustration 6 g06265364
Install strainer (7). Install cap assembly (6).
Illustration 7 g06263321
Install accumulator (3) and accumulator (2).
Install two spacers, clamp assembly (4), the washer, and bolt (5).
Install the washers and bolts (1).End By:
Install the hydraulic tank.