1206040 PLATE Caterpillar parts
CB-614
Rating:
Alternative (cross code) number:
CA1206040
120-6040
1206040
CA1206040
120-6040
1206040
VIBRATORY COMPACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
£49.99
12 Sep 2017
XY&GK: XY&GK
Outdoor Garden Lamp Simple Led Wall Lamp Aluminum Material Wall Lamp Outdoor Waterproof Courtyard Lamp Hotel 120*60*40 (Mm)2*3W Warm Light
These wall luminaires are of the form of classics of wall lighting - harmonious contours,versatile application possibilities and soft appearing light,which flatters every room and is extremely inviting.||Modern and simple style,stylish wall lamp,The average life of use: up to 50000 h||They are truly recommended lighting fixtures for private rooms of every kind and style,as both classical facilities and modernly designed apartments and houses can be perfectly complemented by this form of lighting.||This wall lamp is the ideal accessory for a coherent light concept in the private area,but also in hotel rooms,this beautiful wall light comes perfectly.||If you have any problem about this LED Wall Light,just contact us to refund or return,you can be sure that your investment will be protected.
These wall luminaires are of the form of classics of wall lighting - harmonious contours,versatile application possibilities and soft appearing light,which flatters every room and is extremely inviting.||Modern and simple style,stylish wall lamp,The average life of use: up to 50000 h||They are truly recommended lighting fixtures for private rooms of every kind and style,as both classical facilities and modernly designed apartments and houses can be perfectly complemented by this form of lighting.||This wall lamp is the ideal accessory for a coherent light concept in the private area,but also in hotel rooms,this beautiful wall light comes perfectly.||If you have any problem about this LED Wall Light,just contact us to refund or return,you can be sure that your investment will be protected.
Number on catalog scheme:
2
For full view, you need register
Compatible equipment models: 1206040:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-1114 Vacuum Cap 1
B 9S-3263 Thread Lock Compound -
At operating temperature, the hydraulic tank is hot and under pressure.Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.Remove the filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. Remove the filler cap slowly in order to relieve pressure.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00912925
Install Tooling (A) on the hydraulic tank. Attach hose (1A) to the nipple on Tooling (A) and to an air supply. Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull a vacuum on the hydraulic system.
Thoroughly clean the tapered shaft and degrease the tapered shaft on the motor.
Illustration 2 g00912926
Install gear motor (9) on bracket assembly (5). Install bolts (8) .
Apply Tooling (B) to the threads on the shaft.
Illustration 3 g00912929
Install fan spider assembly (7). Install nut (6). Tighten nut 6 to a torque of 85 10 N m (63 7 lb ft).
Tap adapter (6A) with a punch and hammer. Again tighten nut (6) to a torque of 85 10 N m (63 7 lb ft).
Illustration 4 g00912924
Swing bracket assembly (5) toward the machine and install bolts (4) .
Connect hose assemblies (3) .
Illustration 5 g00912927
Install grill assembly (2) and bolts (1) .
Remove Tooling (A) .
Fill the hydraulic tank. The capacity of the hydraulic tank is approximately 55 L (14.5 US gal). Refer to Operation and Maintenance, "Hydraulic Tank Oil - Change" for the correct filling procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-1114 Vacuum Cap 1
B 9S-3263 Thread Lock Compound -
At operating temperature, the hydraulic tank is hot and under pressure.Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.Remove the filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. Remove the filler cap slowly in order to relieve pressure.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00912925
Install Tooling (A) on the hydraulic tank. Attach hose (1A) to the nipple on Tooling (A) and to an air supply. Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull a vacuum on the hydraulic system.
Thoroughly clean the tapered shaft and degrease the tapered shaft on the motor.
Illustration 2 g00912926
Install gear motor (9) on bracket assembly (5). Install bolts (8) .
Apply Tooling (B) to the threads on the shaft.
Illustration 3 g00912929
Install fan spider assembly (7). Install nut (6). Tighten nut 6 to a torque of 85 10 N m (63 7 lb ft).
Tap adapter (6A) with a punch and hammer. Again tighten nut (6) to a torque of 85 10 N m (63 7 lb ft).
Illustration 4 g00912924
Swing bracket assembly (5) toward the machine and install bolts (4) .
Connect hose assemblies (3) .
Illustration 5 g00912927
Install grill assembly (2) and bolts (1) .
Remove Tooling (A) .
Fill the hydraulic tank. The capacity of the hydraulic tank is approximately 55 L (14.5 US gal). Refer to Operation and Maintenance, "Hydraulic Tank Oil - Change" for the correct filling procedure.
Caterpillar parts catalog:
Parts plate Caterpillar catalog:
12G, 130G, 140G, 508, 621B, 916, 926, 936, 950B, 950B/950E, 966C, 966D, 980C, CB-414, CB-514, CB-534, CB-614, CP-433B, CS-551, D7H, D8L, D9N, E450, G936, IT18, IT18B, IT28B, PS-110, PS-180, RR-250
1206817
PLATE AS
CB-614, RM-250C, RR-250B
CB-614, RM-250C, RR-250B
1206818
PLATE AS
CB-614, RM-250C, RR-250B
CB-614, RM-250C, RR-250B
7X8298
PLATE-WARNING
CB-434, CB-534, CB-614
CB-434, CB-534, CB-614
1G5049
PLATE
CB-614
CB-614
5E0105
PLATE BENT
CB-614
CB-614
5E4886
PLATE-BEARING
CB-614
CB-614
1206139
PLATE, BENT
CB-614
CB-614
63000375
PLATE
CB-614
CB-614
62000474
PLATE, BEARING
CB-614
CB-614
62000254
PLATE, VALVE
CB-614
CB-614
1206492
PLATE, BENT
CB-614
CB-614
62000254
PLATE, VALVE
CB-614
CB-614
62000474
PLATE, BEARING
CB-614
CB-614
E620267
PLATE, VALVE
CB-514, CB-614
CB-514, CB-614
E670538
PLATE, BEARING
CB-514, CB-614
CB-514, CB-614
63000375
PLATE
CB-614
CB-614
779988
PLATE
CB-614
CB-614
A073801
PLATE, RETAINER
PS-110, PS-130, PS-180
PS-110, PS-130, PS-180
0109008
PLATE
CB-614
CB-614
01008952
PLATE, MACHINED
CB-614
CB-614
1206492
PLATE, BENT
CB-614
CB-614
96010047
PLATE, POWER
CB-614
CB-614
1206039
PLATE
CB-614
CB-614