PLATE 1330653 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7575     Link Bracket     2    Start By:
Remove the cooling system package. Refer to Disassembly and Assembly, "Cooling System Package - Remove".Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g01362419
Remove step assembly (1) and sheet assemblies (2) and (3) .
Illustration 2 g01362434
Remove bolts (5) and cover (4) .
Illustration 3 g01362436
Remove bolts (6) and platform (7) .
Illustration 4 g01362437
Remove bolts (8) and panel (9) .
Illustration 5 g01362442
Remove bolts (10) and panel (11) .
Illustration 6 g01362443
Attach Tooling (A) and a suitable lifting device to frame assembly (12). The weight of frame assembly (12) is approximately 34 kg (75 lb).
Illustration 7 g01362444
Remove bolts (13) from both sides of frame assembly (12) .
Illustration 8 g01362450
Remove bolts (14) .
Illustration 9 g01362451
Use the suitable lifting device to remove frame assembly (12) .
Illustration 10 g01362409
Remove belt (15). Refer to Operation and Maintenance Manual, "Belt - Inspect/Adjust/Replace".
Illustration 11 g01362408
Remove bolts (16) and crankshaft vibration damper (17) .
Illustration 12 g01362406
Remove bolts (18) and crankshaft pulley (19) .