1333489 PLATE AS Caterpillar parts
3126, 3126B, 3126E, 3406E, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D, 797, 797B, 814F, 815F, 816F, 834H, 836H, 854K, 966G II, 972G II, 988H, 992K, 994F, C-10, C-...
Rating:
Alternative (cross code) number:
CA1333489
133-3489
1333489
CA1333489
133-3489
1333489
Weight: 0.86 pounds 0 kg.
GEN SET ENGINE, WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$1,254.99
10 Jan 2024
16.5[7.42] pounds
US: Fix_My_Toys
Polaris ATV Gearcase Assembly, AWD, Genuine OEM Part 1333489, Qty 1
Polaris For schematic location 1 only || See product description below for vehicle fitment or to verify fitment for your specific vehicle, please contact us, and provide us with your VIN that can be found on your vehicle or your insurance card. || Gearcase Assembly, AWD, Part 1333489, and all other Polaris Engineered service parts, deliver unmatched performance and fit for your vehicle. Each one is extensively tested in the field and meticulously crafted to match your machine. || All service parts are engineered specifically for your machine. Which means everything is designed, tested and perfected to maximize the life of your ride. || Getting Polaris Engineered parts is a decision that pays off in the long run, because it ensures there is a long run.
Polaris For schematic location 1 only || See product description below for vehicle fitment or to verify fitment for your specific vehicle, please contact us, and provide us with your VIN that can be found on your vehicle or your insurance card. || Gearcase Assembly, AWD, Part 1333489, and all other Polaris Engineered service parts, deliver unmatched performance and fit for your vehicle. Each one is extensively tested in the field and meticulously crafted to match your machine. || All service parts are engineered specifically for your machine. Which means everything is designed, tested and perfected to maximize the life of your ride. || Getting Polaris Engineered parts is a decision that pays off in the long run, because it ensures there is a long run.
$1,219.99
15 Sep 2023
16.5[7.42] Pounds
US: Fix_My_Toys
Polaris ATV Gearcase Assembly, AWD, Genuine OEM Part 1333489, Qty 1
Polaris For schematic location 1 only || See product description below for vehicle fitment or to verify fitment for your specific vehicle, please contact us, and provide us with your VIN that can be found on your vehicle or your insurance card.
Polaris For schematic location 1 only || See product description below for vehicle fitment or to verify fitment for your specific vehicle, please contact us, and provide us with your VIN that can be found on your vehicle or your insurance card.
$1,170.00
14 Jul 2022
US: Polaris Industr
Polaris ATV Gearcase Assembly, AWD, Genuine OEM Part 1333489, Qty 1
Polaris For schematic location 1 only || See product description below for vehicle fitment or to verify fitment for your specific vehicle, please contact us, and provide us with your VIN that can be found on your vehicle or your insurance card.
Polaris For schematic location 1 only || See product description below for vehicle fitment or to verify fitment for your specific vehicle, please contact us, and provide us with your VIN that can be found on your vehicle or your insurance card.
Number on catalog scheme:
10
For full view, you need register
Information:
3406 (92U) and 3408 (28V) EnginesDescription of Change: Several changes have been made to the BrakeSaver groups for the 3406 and 3408 Engines. These changes give a longer service life for the BrakeSavers.A new rotor assembly and seal group are used. The former rotor assembly had a wear sleeve for the seal, but the new rotor assembly does not. The wear sleeve is now a part of the seal group. These changes make it possible to install the wear sleeve and seal as a unit. This will prevent damage to the seal during installation.
The plate assembly was also changed to give more clearance between it and the BrakeSaver front seal. It was some times possible for the former plate assembly to make contact with the seal. The extra clearance between the plate asembly and seal will prevent the seal damage that was the result of this contact.
The BrakeSaver groups now use larger diameter dowels to hold the parts in position. One dowel is used between the rear sleeve and housing assembly. The other fits between the front sleeve and stator. The new dowel has a diameter of 7.92 mm (.312 "). The former dowel had a diameter of 4.78 mm (.188"). A new housing assembly, stator and sleeves were also added to permit use of the larger dowel. The larger dowel will give a reduction in the wear between the dowel and its mating parts (parts that fit together).
Adaptable As: The new parts are a direct replacement for the former parts when used as shown in the chart. INSTALLATION OF PARTS: Install the new seal groups so the seals are at the bottom of their bore. Then make sure the wear sleeve is in the correct position, as shown in the illustration.
The new 9N6490 Sleeve can be used with both new and former parts. This is possible because two notches are machined in the sleeve, 180 ° apart. One of the notches has a smaller radius so it can be used with the former dowels and parts. The other notch has a larger radius for use with the new dowels and parts. Be careful to put the correct notch in alignment with its mating part.
Location of new parts in BrakeSaver group.
The plate assembly was also changed to give more clearance between it and the BrakeSaver front seal. It was some times possible for the former plate assembly to make contact with the seal. The extra clearance between the plate asembly and seal will prevent the seal damage that was the result of this contact.
The BrakeSaver groups now use larger diameter dowels to hold the parts in position. One dowel is used between the rear sleeve and housing assembly. The other fits between the front sleeve and stator. The new dowel has a diameter of 7.92 mm (.312 "). The former dowel had a diameter of 4.78 mm (.188"). A new housing assembly, stator and sleeves were also added to permit use of the larger dowel. The larger dowel will give a reduction in the wear between the dowel and its mating parts (parts that fit together).
Adaptable As: The new parts are a direct replacement for the former parts when used as shown in the chart. INSTALLATION OF PARTS: Install the new seal groups so the seals are at the bottom of their bore. Then make sure the wear sleeve is in the correct position, as shown in the illustration.
The new 9N6490 Sleeve can be used with both new and former parts. This is possible because two notches are machined in the sleeve, 180 ° apart. One of the notches has a smaller radius so it can be used with the former dowels and parts. The other notch has a larger radius for use with the new dowels and parts. Be careful to put the correct notch in alignment with its mating part.
Location of new parts in BrakeSaver group.
Cat SIS web machinery list:
Parts plate Caterpillar catalog:
D8L, D9L, D9N, D9R, D9T
D10N, D8L, D9L, D9N, D9R, D9T
D10R, D10T, D10T2
834G, 834H, 834K, 836G, 836H, 836K
D10, D11N, D11R, D11T
D10N, D10R, D10T, D10T2
D10R, D10T, D10T2
D10R, D10T, D10T2
D11R, D11T
D11R, D11T
836G, 836H
836G, 836H
3176C, 3196, C-10, C-12, CPT372
2954057
PLATE
3406C, C15, C18
3406C, C15, C18
2954056
PLATE AS
3406C, C15, C18
3406C, C15, C18
2418796
PLATE
3406C, 3456, C15, C18, C9
3406C, 3456, C15, C18, C9
2418793
PLATE
3406C, 3456, C15, C18, C9
3406C, 3456, C15, C18, C9
2474782
PLATE
3406C, 3456
3406C, 3456
2405931
PLATE
ES12F
ES12F
2401631
PLATE
ES12F
ES12F
2402523
PLATE
ES12F
ES12F
2402507
PLATE
ES12F
ES12F
1408181
PLATE
3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412E
3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412E
120K, 120K 2, 12K, 140K, 140K 2, 140M, 140M 2, 160K, 160M, 160M 2, 2290, 2390, 2391, 2491, 2590, 3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325...