PLATE AS-PUSH 1334207 - Caterpillar

Illustration 15 g03663178
Install turbine (26) and turbine hub (27) as one unit. Remove bolts (14).
Illustration 16 g03663175
Install backing plate (25).
Illustration 17 g03663169
Install thrust bearing (24) and spline plate (23).
Illustration 18 g03663161
Install clutch disc (22) and plate (21).
Illustration 19 g03663154
Install springs (20) and (19) inside springs (18). Install springs (18) in an alternating pattern. An example would be to install a spring (18) and with a spring (19) inside. The next one would be to install a spring (18) with a spring (20) inside.
Illustration 20 g03663133
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install plate (17) to coupling assembly (15). Install bolts (16). Tighten bolts (16) to a torque of 50 10 N m (37 7 lb ft).
Illustration 21 g03663130
Install coupling assembly (15). Install bolts (14). Tighten bolts (14) to a torque of 60 7 N m (44 5 lb ft).
Illustration 22 g03663122
Install seal (13) onto piston (12).
Illustration 23 g03663115
Install piston (12).
Illustration 24 g03663096
Install O-ring seal (11). Install bearing (10) into clutch housing (8).
Illustration 25 g03665410
Install clutch housing (8) onto the torque converter. Install bolts (7). Tighten bolts (7) to a torque of 60 7 N m (44 5 lb ft).
Lubricate the bore lightly with the lubricant that is being sealed. Install ring (9).
Illustration 26 g03663037
Illustration 27 g03662994
Lubricate sealing lip lightly with the lubricant that is being sealed. Use Tooling (B) to install lip seal (6). Install lip seal (6) flush with face of bearing cage.
Lower the temperature of cups (5) and (4). Install cups (5) and (4). Install bearings (3).
Illustration 28 g03662942
Attach Tooling (A) and a suitable lifting device to torque converter housing (1). The weight of torque converter housing (1) is approximately 190 kg (419 lb).
Lower torque converter housing (1) onto the torque converter. Keep suitable tension on the lifting device to stabilize the torque converter and torque converter housing (1). Install bolts (2).End By:
Connect the torque converter to the transmission.