PLATE 1356137 - Caterpillar

Creeper Speed Control
Creeper Speed Switch (3) - Push down on the SSP control button in order to activate the creeper speed. Use the creeper speed when a low travel speed is desired. When the creeper speed is activated, the indicator light will turn on. Press down on the button in order to deactivate the creeper speed. Creeper speed can be activated when the transmission is in first gear or second gear.Refer to Systems Operation, "Creeper Speed Function" for more information on this function.Beacon Control
Beacon Control (4) The mode of operation for the beacon can be selected using this SSP control button. In order to turn ON the beacon, press the button once. The Machine ECM will activate the relay for the beacon and illuminate the LED indicator. Push the SSP button again to disable the beacon.Ride Control
"Ride Control" (5) - Travel over rough terrain causes bucket movement and a swinging motion. When activated, the ride control function acts as a shock absorber by dampening the forces that are caused by the movement of the bucket. This system will also stabilize the entire machine. When the SSP button is pressed, the Machine ECM will activate the ride control system and will illuminate the LED indicator. When the SSP button is pressed again, the Machine ECM will deactivate the ride control system and turn OFF the LED indicator. Parking Brake Control Switch
Note: If the brake system oil pressure drops below normal operating pressure, a warning horn will sound, the brake accumulator error indicator will come on, the action light will come on, and the parking brake will engage automatically.Note: Do not engage the parking brake while the machine is moving unless the wheel brakes fail. The use of the parking brake as a wheel brake in regular operation can result in severe damage to the parking brake system.
Parking Brake Control (6) - To engage the parking brake, press the parking brake switch. When the parking brake is in the engaged position, the LED above the switch will illuminate and the parking brake indicator on the Monitor illuminates. Note: When the left console is in the RAISED position, the parking brake will be engaged.Note: The parking brake will not engage when low transmission clutch pressure is detected. However, the travel activation will be deactivated and the parking brake solenoid will not change states.Refer to Systems Operation, "Parking Brake Function" for more information on this function."SmartBoom Control"
"SmartBoom Control " (7) - The SmartBoom DOWN mode allows the boom to "float " in the downward direction when hydraulic control is present in the upward direction. The SmartBoom UP AND DOWN mode allows the boom to "float " in the upward direction and the downward direction.
Press on the button once to activate the SmartBoom DOWN mode. The corresponding LED will flash in order to indicate that the DOWN mode is activated. The boom will float down when the joystick is used to activate the BOOM LOWER mode. The corresponding LED will illuminate and stop