PLATE 1363904 - Caterpillar

Right Side Control Panel
Right Side Control Panel(1) Reverse FanReverse Fan (1)
Reverse Fan-Debris can clog the radiator. If this occurs, use the reverse fan function in order to clean the radiator.Battery Disconnect Switch
The battery disconnect switch is located below the left side of the operator seat.
ON-To activate the electrical system, insert the disconnect switch key and turn the battery disconnect switch clockwise. The battery disconnect switch must be turned to the ON position before you start the engine.
OFF-To deactivate the electrical system, turn the battery disconnect switch counterclockwise to the OFF position.The battery disconnect switch operates differently than the engine start switch. When the battery disconnect switch is in the OFF position, the electrical system is disabled. When the engine start switch is turned to the OFF position and the battery disconnect switch is turned to the ON position, the battery remains connected to the entire electrical system.Turn the battery disconnect switch to the OFF position and remove the disconnect switch key when you service the electrical system or other components on the machine.Turn the battery disconnect switch to the OFF position and remove the disconnect switch key if you do not operate the machine for an extended period of a month or more. This will prevent drainage of the battery.
Never move the battery disconnect switch to the OFF position while the engine is operating. Serious damage to the electrical system could result.
Reverse Fan
Make sure that the hydraulic lockout control is in the LOCKED position before you activate the reverse fan function.The "REVERSE FAN" menu allows the operator to operate the radiator cooling fan in reverse. The reverse fan function is an optional attachment which may not be equipped on your machine.1. Press the menu key. 2. Press the right key or the left key in order to highlight the "SERVICE" menu. Press the OK key. You will be prompted to enter a password. Refer to "Password Entry" for information on entering password. 3. After the password has been entered successfully, press the up key or the down key in order to highlight the "MAINTENANCE" menu. Press the OK key. 4. Press the up key or the down key in order to highlight the "REVERSE FAN" menu. Press the OK key. Make sure that the hydraulic lockout control is in the LOCKED position before you activate the reverse fan function.5. The monitor should indicate that the reverse fan function is in "STANDBY" mode. Press the OK key in order to activate the reverse fan function. 6. The monitor should now indicate that the reverse fan function is in "ACTIVE" mode. The reverse fan function will automatically stop when the fan has completed a cycle. However, the reverse fan function can be stopped manually by pressing the left key.7. Press the home key in order to return to the default display. The reverse fan function will not be cancelled if the home key is pressed. Instead, a message that indicates "REVERSE FAN STARTING" will be shown on the default display