PLATE-IDENTIFICATION 1374234 - Caterpillar

Removal Procedure
Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
Remove the front drive shaft. Refer to Disassembly and Assembly, "Drive Shaft - Remove and Install".
Remove the tire and rim. Disassembly and Assembly, "Tire and Rim - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01135962
Attach a suitable lifting device onto both ends of axle (1). The weight of axle (1) is approximately 1225 kg (2700 lb). Apply slight lifting tension in order to support axle (1) .
Illustration 2 g01135964
Disconnect tube assembly (2). Disconnect hose assemblies (3) .
Illustration 3 g01135968
Remove bolt (4). Remove retainer (5). Repeat for the other side.
Illustration 4 g01135970
Remove bolts (6) and the nuts.
Remove axle (1) from the machine.