PLATE 1389449 - Caterpillar

9. Install two lip-type seals (55) in retainer (31) with tooling (B). The lip of the inside seal is toward the inside. The lip of the outside seal is toward the outside.10. Install two O-ring seals (56) on retainer. Make sure the oil passages between the O-rings are clean.11. Install retainer (31) in body (29).12. Put swashplate (50) inside the body (29).13. Install one of the covers (26) with the original shims or 0.38 mm (.015 in) of shims and no O-ring seal. Install four bolts in the cover, one at each corner. Tighten the bolts to a torque of 43 N m (32 lb ft).14. Install the other cover (26) without shims and O-ring seal. Install three bolts in the cover as shown. Tighten the bolts evenly to a torque of 46 cm kg (40 lb in) while moving the swashplate backward and forward. 15. Measure the gap between cover (26) and body (29) with a feeler gauge (57) at the three bolt locations.16. Install shims that are