PLATE-PULLER 1396947 - Caterpillar

1. Remove bolts (1) from fuel transfer pump.2. Remove fuel transfer pump (2).3. Remove service meter (3) from the fuel transfer pump.Install Fuel Transfer Pump
1. Install service meter (1) on the fuel transfer pump (2).2. Put the fuel transfer pump on engine and install the two bolts.Disassemble Fuel Transfer Pump
start by: a) remove fuel transfer pump 1. Remove the nut (2), gear (3), and woodruff key.2. Remove the cage assembly (1).3. Remove O-ring seals from cage assembly. 4. Use tool setup (A) to remove the bearing and lip-type seals from cage. 5. Remove the cover assembly (5).
Be careful not to damage the contacting surfaces of cover assembly and pump body.
6. Remove the seal from cover assembly.7. Remove gear (4), and gear and shaft assembly (6) from pump body. 8. Use tool setup (A) to remove the bearing from pump body.Assemble Fuel Transfer Pump
1. Clean all the parts before assembling the fuel transfer pump. 2. Use tool setup (A) to install the bearing in pump body.3. Put the gear, and gear and shaft assembly in position in pump body. 4. Install the seal in cover assembly using tool setup (B).5. Put a thin layer of 8S6747 Permatex Aviation Type Form-A-Gasket on the face of body assembly.
Do not let Permatex get into pump body.
6. Install the cover assembly on pump body. After the bolts that fasten the cover assembly are tightened, the gear and shaft assembly must turn freely. 7. Use tool setup (B) to install the seals in the cage. Install the inner seal with lip of seal toward pump drive gear. Install the outer seal with lip toward pump body. 8. Install the bearing in cage assembly using tool setup (A).9. Install the O-ring seals on cage assembly.10. Put oil on the O-ring seals and lip-type seals.11. Put the cage assembly in position on the gear and shaft assembly.12. Install the woodruff key, gear, and nut. Tighten the nut 22 5 lb.ft. (3,0 0,7 mkg).end by: a) install fuel transfer pump