PLATE & FILM GP 1400120 - Caterpillar

Table 1
Software Part Numbers     Flash Software to    
New Part     Description     Former Part     Part Name     Part Numbers    
440-9140     Machine Software Gp     398-3532
420-3504
423-3287
437-2104     CONTROLLER     362-3190    
440-9141     Display Software Gp     398-3533
420-3505
437-2105     MODULE GP-DISPLAY (DP200)     357-8407 or 446-0629    
Illustration 1 g03416540
Note: The Flash Files can be downloaded from Caterpillar Service Information System (SIS) under Service Software Files (1). Search the Flash File by the software part number. The latest software file will be available for download.The software flash files must be installed with the Plus+1 Service Tool for Caterpillar (P1STC) software program, refer to Special Instruction, REHS7696, "Software Installation Instructions of the Plus+1 Service Tool for Caterpillar (P1STC) Is Available for Caterpillar Paving Products" and Testing and Adjusting, UENR2480, "Electronic Control Module (ECM) - Flash Program".Ensure to save the machine parameters before flashing the new software. If the machine parameters were not saved, propel current calibration and machine configuration must be performed.The machine ECM and Display ECM software are adaptable to the machines and effective in production with the machines that are listed in Table 2.
Table 2
Sales Model     Adaptable to Machines     Effective in Production with Machines    
CP54B     S/N:CPX1-134     S/N:CPX135-UP    
CP56B     S/N:LHC1-379     S/N:LHC380-UP    
CP68B     S/N:LCF1-113     S/N:LCF114-UP    
CP74B     S/N:L7B1-118     S/N:L7B119-UP    
CS54B     S/N:L4H1-282     S/N:L4H283-UP    
CS56B     S/N:L8H1-589     S/N:L8H590-UP    
CS64B     S/N:C641-112     S/N:C64113-UP    
CS66B     S/N:CS61-154     S/N:CS6155-UP    
CS68B     S/N:MMS1-134     S/N:MMS135-UP    
CS74B     S/N:LCB1-112     S/N:LCB113-UP    
CS76B     S/N:L9H1-106     S/N:L9H107-UP    
CS78B     S/N:L8C1-145     S/N:L8C146-UP