PLATE 1412151 - Caterpillar

Starting Aid Switch - The starting aid switch is located on the right side console. If the machine fails to start due to cold ambient temperatures, the glow plugs can be activated in order to provide heated fuel to the inlet manifold. Refer to Operation and Maintenance Manual, "Starting Below 0°C (32°F)" for the starting procedure with the glow plugs.Rotating Beacon (20)
Rotating Beacon Light (If Equipped) - Press the top of the switch in order to turn on the rotating beacon light. Press the bottom of the switch in order to turn off the rotating beacon light. The rotating beacon light is used to alert other vehicles when the machine is being roaded from one job to another job. Front Floodlights (21)
Front Floodlights (If Equipped) - The switch is a two-position switch (If Equipped). Push the bottom of the switch for the front running lights (If Equipped) or the OFF position if the machine is not equipped with front running lights. Push the top of the switch for the two front floodlights.
Front Floodlights (If Equipped) - The switch is a three-position switch (If Equipped). Push the bottom of the switch for the Front Running Lights. Push the switch to the middle position for the two front floodlights. Push the top of the switch in order to turn on all four front floodlights.Rear Floodlights (22)
Rear Floodlights (If Equipped) - The switch is a two-position switch (If Equipped). Press the bottom of the switch for the OFF position in order to turn off the rear floodlights. Press the top of the switch in order to turn on the rear floodlights.
Rear Floodlights (If Equipped) - The switch is a three-position switch (If Equipped). Push the bottom of the switch to the OFF position in order to turn off the rear floodlights. Press the switch to the middle position for two rear floodlights. Press top of the switch in order to turn on all four rear floodlights.Hitch Speed Switch (23) (If Equipped)
Hitch Speed Switch (If Equipped) - The hitch speed switch is a three position switch. Press the top of the switch in order to run the rear implements at high speed. Press the middle of the switch in order run the rear implements at medium speed. Press the bottom of the switch in order run the rear implements at slow speed. Continuous Flow Switch (24) (If Equipped)
Continuous Flow Switch (If Equipped) - The continuous flow switch works in conjunction with the auxiliary hydraulic switches located on the three-point hitch control. Refer to Operation and Maintenance Manual, "Three-Point Hitch control" for more information. When the auxiliary switch is activated press the continuous flow switch in order to maintain the desired hydraulic flow. Press the continuous flow switch again in order to return flow control to the auxiliary switch. Horn (25)
Horn - Press the top of the switch in order to sound the horn. Use the horn for alerting personnel or for signalling personnel. Throttle Control (26)
Accelerator Lever - This lever controls the