1470638 PLATE AS Caterpillar parts
30/30, DEUCE
Rating:
Alternative (cross code) number:
CA1470638
147-0638
1470638
CA1470638
147-0638
1470638
Weight: 3 pounds 1 kg.
TRACK-TYPE TRACTOR,
Number on catalog scheme:
27
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description QTY
A 3S-6224 Electric Hydraulic Pump Gp 1
6V-3175 Double Acting Cylinder 1
4C-9634 Puller Stud 1
4K-0684 Hard Washer 1
9U-6832 Nut 1
B 7F-6068 Sleeve 1
9U-5337 Adapter 1
C 6V-4035 Sleeve 1
284-2368 Adapter 1
D 1P-0520 Driver Gp 1
E 5P-0960 Grease Cartridge - Start By:
Remove the bucket linkage.
When you are using hydraulic cylinders and puller studs, always ensure that the rated capacity of the puller stud meets or exceeds the rated capacity of the hydraulic cylinder. If the puller stud does not meet or exceed the rated capacity of the hydraulic cylinder, a sudden failure of the puller stud could occur. The sudden failure of the puller stud could result in personal injury or death.
Do not use threaded rods that have not been hardened as tooling with hydraulic cylinders. The maximum rated tonnage should be stamped on one end of the puller studs. Do not use threaded rods that have not been stamped with the rated tonnage.
Illustration 1 g02145635
Illustration 2 g02145636
Remove lip seal (1). Repeat for the other side.
Use Tooling (A) and Tooling (B) in order to remove sleeve bearing (2). Repeat for the other side.
Illustration 3 g02145637
Remove lip seals (3).
Illustration 4 g02145638
Use Tooling (A) and Tooling (C) in order to remove sleeve bearing (4). Repeat for the other side.
Illustration 5 g02423481
Use Tooling (A) and Tooling (C) in order to remove sleeve bearing (5). Repeat for the other side. Installation Procedure
Install the bearings and the lip seals in the reverse order of removal.
Illustration 6 g02146115
Lower the temperature of sleeve bearings (4) and (5). Use Tooling (E) in order to install sleeve bearings (4) and (5). Install sleeve bearings (4) and (5) to Dimension (X). Dimension (X) is 9.5 0.8 mm (0.37 0.03 inch). Apply Tooling (E) to the bore of sleeve bearings (4) and (5).
Use Tooling (D) in order to install lip seals (3).
Illustration 7 g02146118
Lower the temperature of sleeve bearings (2). Use Tooling (E) in order to install sleeve bearings (2). Install sleeve bearings (2) to Dimension (X). Dimension (X) is 9.5 0.8 mm (0.37 0.03 inch). Apply Tooling (E) to the bore of sleeve bearings (2).
Use Tooling (D) in order to install lip seals (1).
Table 1
Required Tools
Tool Part Number Part Description QTY
A 3S-6224 Electric Hydraulic Pump Gp 1
6V-3175 Double Acting Cylinder 1
4C-9634 Puller Stud 1
4K-0684 Hard Washer 1
9U-6832 Nut 1
B 7F-6068 Sleeve 1
9U-5337 Adapter 1
C 6V-4035 Sleeve 1
284-2368 Adapter 1
D 1P-0520 Driver Gp 1
E 5P-0960 Grease Cartridge - Start By:
Remove the bucket linkage.
When you are using hydraulic cylinders and puller studs, always ensure that the rated capacity of the puller stud meets or exceeds the rated capacity of the hydraulic cylinder. If the puller stud does not meet or exceed the rated capacity of the hydraulic cylinder, a sudden failure of the puller stud could occur. The sudden failure of the puller stud could result in personal injury or death.
Do not use threaded rods that have not been hardened as tooling with hydraulic cylinders. The maximum rated tonnage should be stamped on one end of the puller studs. Do not use threaded rods that have not been stamped with the rated tonnage.
Illustration 1 g02145635
Illustration 2 g02145636
Remove lip seal (1). Repeat for the other side.
Use Tooling (A) and Tooling (B) in order to remove sleeve bearing (2). Repeat for the other side.
Illustration 3 g02145637
Remove lip seals (3).
Illustration 4 g02145638
Use Tooling (A) and Tooling (C) in order to remove sleeve bearing (4). Repeat for the other side.
Illustration 5 g02423481
Use Tooling (A) and Tooling (C) in order to remove sleeve bearing (5). Repeat for the other side. Installation Procedure
Install the bearings and the lip seals in the reverse order of removal.
Illustration 6 g02146115
Lower the temperature of sleeve bearings (4) and (5). Use Tooling (E) in order to install sleeve bearings (4) and (5). Install sleeve bearings (4) and (5) to Dimension (X). Dimension (X) is 9.5 0.8 mm (0.37 0.03 inch). Apply Tooling (E) to the bore of sleeve bearings (4) and (5).
Use Tooling (D) in order to install lip seals (3).
Illustration 7 g02146118
Lower the temperature of sleeve bearings (2). Use Tooling (E) in order to install sleeve bearings (2). Install sleeve bearings (2) to Dimension (X). Dimension (X) is 9.5 0.8 mm (0.37 0.03 inch). Apply Tooling (E) to the bore of sleeve bearings (2).
Use Tooling (D) in order to install lip seals (1).
Caterpillar parts catalog:
Parts plate Caterpillar catalog:
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 2290, 2390, 2...
120H, 120H ES, 120H NA, 135H, 135H NA, 213B, 214B, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446, 446B, 446D, 45, 525B, 533, 535B, 539,...
120H, 120H ES, 120H NA, 12H, 135H, 135H NA, 214B, 30/30, 3114, 3116, 3126, 3126B, 3126E, 3176, 3176B, 320 L, 320B, 322 FM L, 322 LN, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, ...
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H NA, 160H, 160H ES, 160H NA, 163H NA, 16H NA, 24H, 30/30, 3116, 3126, 3126B, 3176B, 3176C, 3196, 3304, 3306...
120G, 12F, 12G, 130G, 140, 141, 14E, 14G, 153, 16, 163, 16G, 172, 173B, 183, 183B, 184, 191, 193, 30/30, 416, 416B, 426B, 428, 428B, 438B, 446, 46, 508, 515, 517, 518, 525, 525D, 527, 528, 535D, 545D,...
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 1290T, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 130G, 135H, 135H NA, 1390, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 143H, 14G, ...
30/30, 428, 5130, 65C, 75C, 75D, 85C, 85D, 918F, 924F, 928F, 928G, 928H, 928HZ, AP-1000, AP-1000B, AP-1055B, AP-650B, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-2455C, BG-245C, D4H, D4H XL, D4HTS...
30/30, 428, 5130, 65C, 75C, 75D, 85C, 85D, 918F, 924F, 928G, 928H, 928HZ, 938F, 938G, 938G II, 988F, 988F II, AP-1000, AP-1000B, AP-1055B, AP-650B, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-2455...
30/30, 572R, 572R II, 578, 583R, 583T, 587R, 587T, 611, 615, 615C, 637E, 69D, 735, 735B, 740, 740B, 768C, 769C, 769D, 770, 770G, 770G OEM, 771C, 771D, 772, 772G, 772G OEM, 776C, 776D, 777B, 777D, 777F...
30/30, 572R, 572R II, 578, 583R, 583T, 587R, 587T, 611, 615, 615C, 814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 966D, 966F, 966F II, 966G, 966G II, 970F, 972G, 972G II, 972H, 972K, 972M, 9...
30/30, 572R, 572R II, 578, 583R, 583T, 587R, 587T, 611, 615C, 814B, 814F, 815B, 815F, 816F, 966D, 966F, 966F II, 970F, 980C, 980F, 980F II, 980G, 980G II, 980H, 980K, D250E, D250E II, D25D, D300E, D30...
30/30, 517, 527, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, DEUCE
8E5962
PLATE
30/30, D10N, D10R, D11N, D11R, D5M, D5N, D6E, D6F SR, D6G, D6G SR, D6G2 LGP, D6G2 XL, D6M, D6N, D6R, D7R, D8N, D8R, D9N, D9R, DEUCE
30/30, D10N, D10R, D11N, D11R, D5M, D5N, D6E, D6F SR, D6G, D6G SR, D6G2 LGP, D6G2 XL, D6M, D6N, D6R, D7R, D8N, D8R, D9N, D9R, DEUCE
1784916
PLATE-INSTRUCTION
30/30, DEUCE
30/30, DEUCE
1599617
PLATE
30/30, DEUCE
30/30, DEUCE
1839189
PLATE AS
DEUCE
DEUCE
2844614
PLATE AS
DEUCE
DEUCE
1606354
PLATE AS
30/30, 613G, 621B, 621G, 621H, 621K, 623G, 623H, 623K, 623K LRC, 627F, 627G, 627H, 627K, 627K LRC, 631D, 631E, 631G, 633E II, 637D, 637E, 637G, 651B, 657B, 657G, 770, 772, 773F, 775F, 777F, 814F, 814F...
30/30, 613G, 621B, 621G, 621H, 621K, 623G, 623H, 623K, 623K LRC, 627F, 627G, 627H, 627K, 627K LRC, 631D, 631E, 631G, 633E II, 637D, 637E, 637G, 651B, 657B, 657G, 770, 772, 773F, 775F, 777F, 814F, 814F...
1247046
PLATE
30/30, DEUCE
30/30, DEUCE
120G, 12G, 130G, 140G, 14G, 16G, 227, 235B, 245, 30/30, 508, 518, 518C, 528B, 530B, 621G, 623G, 627G, 631G, 637G, 657G, 834B, 836, 988B, 988F, 988F II, 992C, 992D, 994, 994D, D10R, D11R, D6R, D6R III,...
6T8943
PLATE
120G, 12G, 130G, 140G, 14G, 16G, 227, 235B, 245, 30/30, 508, 518, 518C, 528B, 530B, 621G, 623G, 627G, 631G, 637G, 657G, 834B, 836, 988B, 988F, 988F II, 992C, 992D, 994, 994D, D10R, D11R, D6R, D6R III,...
120G, 12G, 130G, 140G, 14G, 16G, 227, 235B, 245, 30/30, 508, 518, 518C, 528B, 530B, 621G, 623G, 627G, 631G, 637G, 657G, 834B, 836, 988B, 988F, 988F II, 992C, 992D, 994, 994D, D10R, D11R, D6R, D6R III,...
1445632
PLATE-BENT
30/30, DEUCE
30/30, DEUCE