PLATE-LENS 1481219 - Caterpillar

Illustration 1 g06266633
Saving Configuration to a File
Enter a document name and description in the appropriate text boxes. Press the "Sa" button. The "Fleet/Key Configuration saved successfully" message box displays. Press the "Cancel" push button to exit the "Save As Document To File" dialog box without saving the file. You will return to the "Fleet/Key" dialog box.Loading Data from a File
Connect the service tool to the ECM to be programmed.
Select "Copy Configuration" from the "Service" menu, and then select "Fleet/Key Configuration" from the submenu.If there is no recently loaded data available, the "No data is available..." message box displays.
Press "No" that you do not want to load data from the ECM. The "Fleet/Key Configuration screen" displays.
Press the "Load from File" push button. The "File Management" dialog box displays.
If the "Load from File" push button is pressed with unsaved data on the "Fleet/Key Configuration" screen, a message box displays asking if you want to save changes.
From the"File Management" dialog box, highlight the file from the "Files" list box. Next highlight the "Fleet/Key Configuration document" that you want to load from the "Documents" list box.
Open the document. As the data loads, a progress bar displays. Then, the "Fleet Configuration" message box displays.
Press "OK". The "Fleet/Key Configuration" screen displays with the file data.Programming the ECM
Note: The data must be loaded from a file before you can program an ECM.Note: Keys that are already programmed into the ECM can be unchecked from the "Fleet/Key Configuration" screen. This unchecking method is only a time saving measure. If you do not uncheck the keys, the "Program ECM" message box displays. This message box lists all keys that were not programmed because the keys were already stored.Press the "Program ECM" push button. The "ECM Selector" dialog box displays.
Illustration 2 g06266648
ECM Selector dialog box
Highlight an ECM and press "OK" The "Please wait" message box displays. Then the "Testing ECM" progress bar displays.You can cancel the uploading process at any time, by pressing the "Cancel" push button. The "Are you sure..." message box displays. Press "Yes" to cancel uploading the data or "No" not to cancel.Refer to the following procedures when you "Append" or "Replace" the key list. Refer to the "Append" section to append the list. Refer to the "Replace" section to replace the list.Append
Connect the service tool to the machine service port.
Start the Cat® Electronic Technician (Cat ET) Service ToolNote: This procedure requires Cat ET version 2017B or later.
Illustration 3 g03864388
Copy Configuration, Service Menu, Fleet/Key Configuration
Select "Copy Configuration" from the "Service" menu, and then select "Fleet/Key Configuration" from the submenu.
Open the document. As the data loads, a progress bar displays. Then, the "Fleet Configuration" message box displays.
Press "OK". The "Fleet/Key Configuration" screen displays with the file data.
Click the "Program ECM" button. The testing ECM dialogue appears. Then the ECM selector dialog appears. Select the appropriate ECM.
Illustration 4 g03864392
Append
Click the "Append" button.
Illustration 5 g00900409
Click the "Yes" button if you are prompted.When the data has been successfully uploaded, the "Programming complete." message box displays. Press "OK"Note: The MSS is limited to a