PLATE AS 1504776 - Caterpillar

Illustration 8 g02713773
Select "Configuration" from the "Service"menu.
Illustration 9 g02722684
Expand the list for "Control Input Installations and Configurations". Highlight the parameter to change and click on the "Change" button on the lower left corner.
Illustration 10 g02722688
Select the appropriate "Control Input" for the controls installed on the machine. Press OK to enter the change. Reference: Refer to "Control Installation Parameter Descriptions" for descriptions of each of the Tool Installation parameters that are available for the tool control system.Control Installation Parameter Descriptions
Table 14
Control Installation Parameter Descriptions
Cat ET Name Monitor Name Description Explanation
Joystick Handle Configuration "JOYSTICK HANDLE" Type of joystick handle Set type of joystick handle installed on the machine.
Type of handle:
"Basic Handle": Lever installed on the standard machine
"Joystick Switch": Lever with 4 buttons on standard lever
"Modulation Handle": Lever with thumb wheel and 3 buttons
Foot Switch Installation Status "FOOT SW" Installation setting of foot switch Set installation condition of foot switch.
Left Attachment Pedal Installation Status "ATCH LEFT PEDAL" Installation setting of left ATT pedal Set installation condition of left ATT pedal.
Right Attachment Pedal Installation Status "ATCH RIGHT PEDAL" Installation setting of right ATT pedal Set installation condition of right ATT pedal.
Left Joystick Switch #1 Control Mode "LEFT JOYSTK #1 MODE" Operating target of left joystick switch #1 Set ATT valve and switching operation to be operated by left joystick switch #1.
"Momentary" is selected to press and hold the switch for tool activation.
"Toggled" is selected to press for tool activation ON and press