1633359 PLATE AS Caterpillar parts
10 FT, 10-20B, AP-1055D, BG-2455D, BG-260D
Rating:
Alternative (cross code) number:
CA1633359
163-3359
1633359
CA1633359
163-3359
1633359
Weight: 58 pounds 26 kg.
ASPHALT PAVER, ASPHALT SCREED,
Compatible equipment models: 1633359:
Number on catalog scheme:
2
For full view, you need register
Information:
Specifications
Illustration 1 g02539796
Table 1
Specification for 206-3336 Pilot Valve Gp
Item Qty Part Specification Description
1 2 - Torque screws to
8.8 1.0 N m (77.9 8.8 lb in).
2 2 190-7819 Spring Free length is
38.5 mm (1.52 inch).
3 1 - Torque plug to
29.4 2.0 N m (260.2 17.7 lb in).
4 1 107-6479 Plug Torque to
27.0 2.5 N m (239.0 22.1 lb in).
5 2 - Torque bolts to
8.8 1.0 N m (77.9 8.8 lb in).
6 2 - Torque to
36.3 2.0 N m (26.8 1.5 lb ft). Removal Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge Gp 1
B - Loctite 271 - Start By:
Release the hydraulic system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 2 g02532517
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 3 g02155365
Remove bolts (1) and plate assembly (2) .
Illustration 4 g02155773
Disconnect harness assembly (4) and hose assemblies (6). Remove pressure switch (5) and fittings (3).
Illustration 5 g02155774
Remove bolts (8) and pedal (7) .
Illustration 6 g02155775
Remove bolts (9) and auxiliary pilot valve (10) .Installation Procedure
Install auxiliary pilot valve (10) in the reverse order of removal.
Tighten bolts (8) to a torque of 17 2 N m (150 18 lb in).
Apply Tooling (B) to the threads of bolts (1) .
Illustration 1 g02539796
Table 1
Specification for 206-3336 Pilot Valve Gp
Item Qty Part Specification Description
1 2 - Torque screws to
8.8 1.0 N m (77.9 8.8 lb in).
2 2 190-7819 Spring Free length is
38.5 mm (1.52 inch).
3 1 - Torque plug to
29.4 2.0 N m (260.2 17.7 lb in).
4 1 107-6479 Plug Torque to
27.0 2.5 N m (239.0 22.1 lb in).
5 2 - Torque bolts to
8.8 1.0 N m (77.9 8.8 lb in).
6 2 - Torque to
36.3 2.0 N m (26.8 1.5 lb ft). Removal Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge Gp 1
B - Loctite 271 - Start By:
Release the hydraulic system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 2 g02532517
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 3 g02155365
Remove bolts (1) and plate assembly (2) .
Illustration 4 g02155773
Disconnect harness assembly (4) and hose assemblies (6). Remove pressure switch (5) and fittings (3).
Illustration 5 g02155774
Remove bolts (8) and pedal (7) .
Illustration 6 g02155775
Remove bolts (9) and auxiliary pilot valve (10) .Installation Procedure
Install auxiliary pilot valve (10) in the reverse order of removal.
Tighten bolts (8) to a torque of 17 2 N m (150 18 lb in).
Apply Tooling (B) to the threads of bolts (1) .
Caterpillar parts catalog:
Parts plate Caterpillar catalog:
10 FT, 10-20B, 8-16B
1047872
PLATE GP-BEVEL END
10-20B, BG-245C
10-20B, BG-245C
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 2290, 2390, 2...
120G, 12F, 12G, 130G, 140, 141, 14E, 14G, 153, 16, 163, 16G, 172, 173B, 183, 183B, 184, 191, 193, 30/30, 416, 416B, 426B, 428, 428B, 438B, 446, 46, 508, 515, 517, 518, 525, 525D, 527, 528, 535D, 545D,...
3114, 3116, 3126, 3126B, 3126E, 521B, 522B, 570B, 573, 580B, AP-1055D, AP-755, BG-2455D, BG-260D, C-12, C-9, C13, C7, C9, CX31-C9I, MTC735, TH31-E61, TH35-C13T
236D, 2384C, 242D, 246D, 2484C, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP, 525D, 535D, 545D, 555D, 559C, 579C, 777G, 906H2, 907H2, 908H2, AP-1055B, AP-1055D, AP-600D, AP...
4T8338
PLATE
10-20B, 2384C, 2484C, 559C, 579C, 584, 615C, 631G, 637G, 793D, 8-16B, AP-1055B, BG-2455C, BG-245C, D11N, D11R
10-20B, 2384C, 2484C, 559C, 579C, 584, 615C, 631G, 637G, 793D, 8-16B, AP-1055B, BG-2455C, BG-245C, D11N, D11R
1068052
PLATE AS
10 FT, 10-20B, AP-1000, AP-1050, AP-800C, BG-225B, BG-2455C, BG-245C
10 FT, 10-20B, AP-1000, AP-1050, AP-800C, BG-225B, BG-2455C, BG-245C
1220900
PLATE
10 FT, 10-20B, 8 FT, 8-16B, AP-1000B, AP-800C, BG-225B
10 FT, 10-20B, 8 FT, 8-16B, AP-1000B, AP-800C, BG-225B
1243725
PLATE AS
10 FT, 10-20B, AP-800C, BG-225B, BG-245C
10 FT, 10-20B, AP-800C, BG-225B, BG-245C
1193852
PLATE
10-20B, 10B, AP-1000B, AP-1055B, AP-650B, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-2455C, BG-245C
10-20B, 10B, AP-1000B, AP-1055B, AP-650B, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-2455C, BG-245C
2765347
PLATE-VALVE
AP-655D, AP1000E, AP1055E, BG-260D, BG1000E, BG1055E
AP-655D, AP1000E, AP1055E, BG-260D, BG1000E, BG1055E
1633360
PLATE AS
10 FT, 10-20B, AP-1055D, BG-2455D, BG-260D
10 FT, 10-20B, AP-1055D, BG-2455D, BG-260D
1247355
PLATE AS
10 FT, 10-20B
10 FT, 10-20B
1247353
PLATE AS
10 FT, 10-20B
10 FT, 10-20B
8I0986
PLATE AS
10 FT, 10-20B, AP-1055D, BG-2455D, BG-260D
10 FT, 10-20B, AP-1055D, BG-2455D, BG-260D
8I0300
PLATE AS
10 FT, 10-20B, AP-1055D, BG-2455D, BG-260D
10 FT, 10-20B, AP-1055D, BG-2455D, BG-260D
8I0297
PLATE AS
10 FT, 10-20B, AP-1055D, AS3301C, BG-2455D, BG-260D
10 FT, 10-20B, AP-1055D, AS3301C, BG-2455D, BG-260D
1843261
PLATE AS
10 FT, 10-20B, 8-16B, AP-1055D, AP-655C, BG-2455D, BG-260D
10 FT, 10-20B, 8-16B, AP-1055D, AP-655C, BG-2455D, BG-260D
1843260
PLATE AS
10 FT, 10-20B, 8-16B, AP-1055D, AP-655C, BG-2455D, BG-260D
10 FT, 10-20B, 8-16B, AP-1055D, AP-655C, BG-2455D, BG-260D
1459448
PLATE AS
10 FT, 10-20B, 8-16B
10 FT, 10-20B, 8-16B
1459447
PLATE AS
10 FT, 10-20B, 8-16B
10 FT, 10-20B, 8-16B
8I0483
PLATE AS
10 FT, 10-20B
10 FT, 10-20B
8I0482
PLATE AS
10 FT, 10-20B
10 FT, 10-20B