PLATE 1720170 - Caterpillar

ACTION REQUIRED
****Parts Stock ****
Remove the 274-8567 Gasket from stock and scrap.
The Gasket Kits listed below need to be reworked. Replace the 274-8567 Gasket currently in the gasket kit with a 110-6991 Gasket. Mark packaging to make note of part consist change.
292-6840
292-6943
292-6948
292-9247
293-2924
293-2929
293-2933
293-2935
293-2968
293-3044
301-5282
316-1202
316-1219
316-5212
****Affected Product****
The engines in the affected product need to have the cylinder head gaskets replaced with the 110-6991 Gasket before failure to prevent cylinder block damage.
The 110-6994 Spacer Plate may have a large quantity of gasket material adhered to it. This material can be very difficult to remove. If the spacer plate cannot be easily cleaned, you are authorized to replace with a new part of the same part number.
SERVICE CLAIM ALLOWANCES
****Parts Stock****
Submit one claim for all parts removed from dealer parts stock.
****Affected Product****
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 1*******
0-5000 hrs 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 183.0-hour job for Group 1
R&I 135 hours, D&A Cylinder heads 48 hours
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-5000 hrs 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 247.0-hour job for Group 2
R&I 175 hours, D&A Cylinder heads 72 hours
PARTS DISPOSITION
****Parts Stock****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
****Affected Product****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.