1733450 PLATE-FRICTION Caterpillar parts
315D L, 316E L, 318C, 318D L, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L...
Rating:
Alternative (cross code) number:
CA1733450
173-3450
1733450
CA1733450
173-3450
1733450
Weight: 0.14 pounds 0 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$58.70
23 Feb 2024
US: Fast 404
1733450 Plate-Friction Fits Caterpillarr Models
BSlocator Part Number: 1733450
BSlocator Part Number: 1733450
$12.56
18 May 2021
Amazon.com
1733450 Plate-Friction - Fits: 321C 320D 318D L 323F
GEN Product Type :Bearings And Bushings || Package Dimensions :9.0 " L X 7.0 " W X 0.1 " H || Country Of Origin :Wales || Package Weight :0.2Lbs
GEN Product Type :Bearings And Bushings || Package Dimensions :9.0 " L X 7.0 " W X 0.1 " H || Country Of Origin :Wales || Package Weight :0.2Lbs
$27.84
08 Mar 2019
Unknown: Unknown
Caterpillar 1733450 Plate-Friction New
Number on catalog scheme:
19
For full view, you need register
Compatible equipment models: 1733450:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 4C-5592 Lubricant 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01020078
Note: Thoroughly clean the spacer plate and the bottom surface of the cylinder head. A new spacer plate gasket must be installed when the cylinder head is removed.
Install the O-ring seals, spacer plate (19) , and cylinder head gasket (18) .
Attach a suitable lifting device to the cylinder head. The weight of the cylinder head is approximately 235 kg (518 lb).
Carefully install the cylinder head on the dowel pins on the cylinder block.
Illustration 2 g01020075
Illustration 3 g01020264
Note: The following bolts are 216 mm (8.5 inch) long: 11, 12, 13, 14, 16, 18, 20, 22, 24 and 26. The following bolts are 198.8 mm (7.83 inch) long: 2, 8 and 10. The rest of the bolts are 194 mm (7.6 inch) long.Note: Apply Tooling (A) to the bolt threads and both sides of the washers. Tighten the bolts in the following step sequence:
Install cylinder head bolts (15) according to the following procedure.
In a numerical sequence, tighten bolts 1 through 26 to a torque of 270 15 N m (200 11 lb ft).
In a numerical sequence, tighten bolts 1 through 26 to a torque of 450 15 N m (330 11 lb ft).
In a numerical sequence, again tighten bolts 1 through 26 to a torque of 450 15 N m (330 11 lb ft).Note: The flatness of the cylinder head should be within a total of 0.13 mm (0.005 inch). Also, the flatness of the cylinder head should be within a maximum of 0.05 mm (0.002 inch) for any 150 mm (5.9 inch) span.
Install strap (17) .
Connect hose (16) .
Illustration 4 g01020071
Install harness assembly in position. Install clips (14) .
Connect hose assembly (13) .
Connect hose assembly (12) .
Install fuel filter base (10) in position. Install bolts (11) that connect fuel filter base (10) to the cylinder head.
Connect hose (7) . Install tube assembly (8) and tube assembly (9) .
Illustration 5 g01020267
Install O-ring seal (5) and O-ring seal (6) on seal assembly (3) .
Illustration 6 g01020269
Install seal assembly (3) and adapter (4) .
Illustration 7 g01020270
Install bolts (2) and thrust plate (1) .End By:
Install the turbochargers. Refer to Disassembly and Assembly, "Turbocharger - Install".
Install the valve mechanism cover base. Refer to Disassembly and Assembly, "Valve Mechanism Cover Base - Remove and Install".
Install the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit Injector - Install".
Install the camshaft gear. Refer to Disassembly and Assembly, "Camshaft Gear - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 4C-5592 Lubricant 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01020078
Note: Thoroughly clean the spacer plate and the bottom surface of the cylinder head. A new spacer plate gasket must be installed when the cylinder head is removed.
Install the O-ring seals, spacer plate (19) , and cylinder head gasket (18) .
Attach a suitable lifting device to the cylinder head. The weight of the cylinder head is approximately 235 kg (518 lb).
Carefully install the cylinder head on the dowel pins on the cylinder block.
Illustration 2 g01020075
Illustration 3 g01020264
Note: The following bolts are 216 mm (8.5 inch) long: 11, 12, 13, 14, 16, 18, 20, 22, 24 and 26. The following bolts are 198.8 mm (7.83 inch) long: 2, 8 and 10. The rest of the bolts are 194 mm (7.6 inch) long.Note: Apply Tooling (A) to the bolt threads and both sides of the washers. Tighten the bolts in the following step sequence:
Install cylinder head bolts (15) according to the following procedure.
In a numerical sequence, tighten bolts 1 through 26 to a torque of 270 15 N m (200 11 lb ft).
In a numerical sequence, tighten bolts 1 through 26 to a torque of 450 15 N m (330 11 lb ft).
In a numerical sequence, again tighten bolts 1 through 26 to a torque of 450 15 N m (330 11 lb ft).Note: The flatness of the cylinder head should be within a total of 0.13 mm (0.005 inch). Also, the flatness of the cylinder head should be within a maximum of 0.05 mm (0.002 inch) for any 150 mm (5.9 inch) span.
Install strap (17) .
Connect hose (16) .
Illustration 4 g01020071
Install harness assembly in position. Install clips (14) .
Connect hose assembly (13) .
Connect hose assembly (12) .
Install fuel filter base (10) in position. Install bolts (11) that connect fuel filter base (10) to the cylinder head.
Connect hose (7) . Install tube assembly (8) and tube assembly (9) .
Illustration 5 g01020267
Install O-ring seal (5) and O-ring seal (6) on seal assembly (3) .
Illustration 6 g01020269
Install seal assembly (3) and adapter (4) .
Illustration 7 g01020270
Install bolts (2) and thrust plate (1) .End By:
Install the turbochargers. Refer to Disassembly and Assembly, "Turbocharger - Install".
Install the valve mechanism cover base. Refer to Disassembly and Assembly, "Valve Mechanism Cover Base - Remove and Install".
Install the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit Injector - Install".
Install the camshaft gear. Refer to Disassembly and Assembly, "Camshaft Gear - Install".
Cat SIS web machinery list:
Parts plate Caterpillar catalog:
318C, 319C, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN, 323D SA
318C, 320B, 320C, 325B L, 325C, 330B L, 330C, 345B II, 345B L, 814F, 814F II, 815F, 815F II, 824G, 824G II, 824H, 825G, 825G II, 825H, 918F, 928F, 936, 936F, 938F, 938G, 938G II, 950B, 950B/950E, 950F...
318C, 320C, 325C, 330C, 345B II, 5110B, 938G II, 950G II, 962G II, 966G II, 972G II, 980G II
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 14...
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 322C, 322C FM, 323D L, 323D2 L, 323E L, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E...
1090, 1190, 1190T, 1390, 2290, 2390, 2391, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322B L, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D FM, 324D FM LL, 325, 325 L, 325B, 32...
320B, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322B L, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325C FM, 325D, 32...
320B, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322B L, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325C FM, 325D, 32...
320 L, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D FM, 324D FM LL, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 328D LCR, 329D, 329D L, 329D L...
320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LRR, 320D RR, 321C, 321D LCR, 323D L
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
320D, 320D FM
315D L, 316E L, 318C, 318D L, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L...
315D L, 316E L, 318C, 318D L, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L...
315D L, 316E L, 318C, 318D L, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L...
315D L, 316E L, 318C, 318D L, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L...
2023790
PLATE
318C, 319C
318C, 319C
2916249
PLATE-REINFORCEMENT
318C, 320C, 320D, 320D L, 320D LRR, 321C, 322C, 324D, 324D L, 325D L
318C, 320C, 320D, 320D L, 320D LRR, 321C, 322C, 324D, 324D L, 325D L
2916250
PLATE-WEAR
318C, 320C, 320D, 320D L, 320D LRR, 321C, 322C, 324D, 324D L, 325D L
318C, 320C, 320D, 320D L, 320D LRR, 321C, 322C, 324D, 324D L, 325D L
2905997
PLATE-WEAR
318C, 320C, 320D, 320D L, 320D LRR, 321C, 322C, 324D, 324D L
318C, 320C, 320D, 320D L, 320D LRR, 321C, 322C, 324D, 324D L
2968596
PLATE AS-BOX
318C, 320C, 320D, 320D L, 320D LRR, 321C, 322C, 324D, 324D L
318C, 320C, 320D, 320D L, 320D LRR, 321C, 322C, 324D, 324D L
2063206
PLATE-IDENTIFICATION
318C, 320C, 321C, 322C, 325C
318C, 320C, 321C, 322C, 325C
318C, 319C, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN, 323D SA