PLATE AS 1734188 - Caterpillar

Table 1
Required Equipment    
Item     Part Number     Description     Qty    
1     8C-7576     Fitting Adapter     2    
2     5D-9231     Connector     4    
3     256-3859     Hose     2    
4     3B-8489     Grease Fitting     2    
5     5U-7151     Cap     2    In order to install the equipment, the tailgate needs to be removed from the machine. Access holes need to be drilled in the bottom plate of each of the arms beneath the bosses in the arms for the pivots. Finally, holes need to be drilled and tapped into the bosses.
Illustration 1 g01209348
For information about the modifications that are needed on the arms of the tailgate, refer to Illustration 1 and Table 2.
Table 2
Dimensions    
A    
920 2 mm (36 0.08 inch)    
B     1/8-27 NPTF Threaded Hole    
C    
15 0.25 mm (0.60 0.01 inch) Hole    
D    
50 0.5 mm (1.97 0.02 inch)    
Illustration 2 g01209621
When modifications to the arms of the tailgate are complete, Install fitting adapter (1) through the 15 0.25 mm (0.60 0.01 inch) hole and screw the connector into the 1/8-27 NPTF threaded hole in the boss.Install connector (2) onto the exposed end of fitting adapter (1). Continue the installation with hose (3), connector (2), grease fitting (4) and cap (5).