PLATE-WEAR 1760538 - Caterpillar

Illustration 1 g02798722
Table 1
Specification for 249-5309 Differential and Bevel Gear Gp    
Item     Qty     Part     Specification Description    
1     1     9W-3660 Bevel Pinion     Prevent pinion from rotating with an appropriate sized threaded fixture.
Torque to 7 N m (62 lb in) maximum while setting backlash and remove afterwards.    
2     -     -     Use an appropriate sized bolt in the case. Tighten the bolt until there is no end play in the pinion. Position the bevel and transfer gear group with the bevel gear shaft in the vertical position while the bevel gear is at the bottom. Add shims (10) in order to reduce the backlash or remove the shims in order to increase the backlash.    
3     1     9P-1922 Shim Pack     As required, use the following shim pack to obtain
0.10 0.05 mm (0.004 0.002 inch) end play.
9P-1922 Shim Pack contains 14 shims:
Total thickness of the shim pack is
2.01 mm (0.079 inch).
Thickness of