PLATE 1764219 - Caterpillar

2. Disconnect air line (1) from the governor control cylinder group.3. Remove cotter pin and pin (3). Disconnect rod (2) from the governor lever. 4. Remove bolts (5). Remove governor control cylinder group (4). Remove the rod from the governor control cylinder group.Install Governor Control Cylinder Group
1. Install rod (1) on the governor control cylinder group.2. Put governor control cylinder group (2) in position on the bracket and install the bolts that hold it.3. Put rod (1) in position on the governor lever (3). Install the pin and cotter pin that hold it. 4. Make an adjustment to rod (1) so lever (3) is in low idle position when governor control cylinder group (2) is fully retracted.5. Put the hoods in the "CLOSED" position.