PLATE AS 1899810 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7575     Link Brackets     4    Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01270261
Install Tooling (A) and a suitable lifting device to hydraulic tank (20). The weight of hydraulic tank (20) is approximately 544 kg (1200 lb). Install hydraulic tank (20) .
Illustration 2 g01270259
Install bolts and spacers (21) .
Illustration 3 g01270262
Position hose assembly (17). Install bolts (18). Install cable straps (19) .
Illustration 4 g01270263
Connect hose assembly (17). Install bolts (16) .
Illustration 5 g01270273
Install bolts (15) .
Illustration 6 g01270272
Connect hose assembly (14) .
Illustration 7 g01270271
Install bolts (13) .
Illustration 8 g01270270
Connect hose assembly (12). Connect harness assembly (11) .
Illustration 9 g01270269
Connect hose assembly (10). Position harness assembly (8). Install bolts (9) .
Illustration 10 g01270268
Connect harness assembly (7) and install the cable strap.
Illustration 11 g01270264
Connect hose assemblies (5) and (6) .
Illustration 12 g01270267
Install bolts (3) from pipe (4) .
Illustration 13 g01270265
Position sheet (2). Install bolts (1).
Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".