PLATE-INSTRUCTION 1907630 - Caterpillar

Table 1
Parts List
Idler Tread Diameter Serviceable Part Number Sub-assembly Part Number(1) Description
620.0 mm (24.4 inch) 111-1729 - Track Idler Gp
244-0878 - Track Idler Gp, Arctic
244-1324 - Track Idler Gp, Waste Handling
- 425-0481(2) Idler As
- 6Y-0552(3) Idler
698.0 mm (27.5 inch) 111-1730 - Track Idler Gp
244-0879 - Track Idler Gp, Arctic
244-1323 - Track Idler Gp, Waste Handling
- 425-0476(4) Idler As
- 6Y-0555(5) Idler
(1) Not serviced separately; for field identification only
(2) Part number stamped into machined hub face of 620.0 mm (24.4 inch) diameter fabricated idlers
(3) Part number on web of 620.0 mm (24.4 inch) diameter cast or forged idlers
(4) Part number stamped into machined hub face of 698.0 mm (27.5 inch) diameter fabricated idlers
(5) Part number on web of 698.0 mm (27.5 inch) diameter cast or forged idlers
Illustration 1 g06295617
Fabricated idler with four lateral gusset welds
Illustration 2 g06295619
General Duty fabricated idler with no lateral gusset welds
The new fabricated idlers have plate steel sidewalls and lateral gussets welded to an induction hardened ring-rolled rim. The four lateral gusset welds are what structurally and visually differentiate the new fabricated idlers from D8 General Duty fabricated idlers. Refer to Illustration 1 and Illustration 2.
Illustration 3 g06295621
Existing cast or forged idler with center web
The new fabricated idlers and existing cast or forged idlers are acceptable for use on the machines within the listed serial numbers. However, D8 General Duty idlers should not be used in high impact applications or on Pipelayers.The new idler design has the same tread diameter and wear life properties as the existing cast or forged idlers. When the fabricated idlers are worn, the idlers can be rebuilt by following SEBF8552, "Idler Weld Rebuild Procedure".The fabricated idler contains the same shaft, bearings, seals, retainers, and hardware as the existing cast and forged idlers.Note: It is acceptable to mix fabricated, forged, or cast idlers on the same machine.