PLATE 1934978 - Caterpillar

Illustration 1 g03354666
Table 1
Specification for 9Y-8902 Engine Oil Lines Gp
Item Qty Part Specification Description
1 2 6B-9202 Spring Length under test force is 68.3 mm (2.69 inch).
Test force is 84.5 to 99.6 N (19.0 to 22.4 lb).
Free length after test is 112.7 mm (4.44 inch).
Both of the 7N-7697 Plunger must start to open at 130 30 kPa (19 4 psi) pressure difference.
Both of the 7N-7697 Plunger must be fully open at 200 30 kPa (29 4 psi) pressure difference.
2 1 2W-1053 Plug Torque to 100 15 N m (74 11 lb ft).
3 1 2W-1635 Spring Length under test force is 102.0 mm (4.02 inch).
Test force is 518 26 N (116 6 lb).
Free length after test is 143.4 mm (5.65 inch).
The 2W-1969 Bypass Valve must open with 180 20 kPa (26 3 psi) pressure difference.
4 2 0S-1594 Bolt Use the following procedure in order to tighten the bolts of the clamp assembly:
1. Tighten the clamp assembly until the clamp assembly snug to tube.
2. Tighten the clamp assembly to the adapter.
3. Tighten the clamp assembly to the tube.
5 2 0S-1571 Bolt
6 2 109-2332 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.