PLATE 1H8272 - Caterpillar

Removal Procedure
Note: Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all lines and on all hoses for installation purposes. Plug all lines and hoses. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g00641007
Remove six bolts (2) .
Remove the washers and sheet (1) under the cab.
Illustration 2 g00641011
Disconnect hose (4) from wiper arm assembly (3) .
Illustration 3 g00641013
Disconnect wiring harness (8) from window wiper motor (7) .
Remove three bolts (6) and the washers that hold window wiper motor (7) in position. Remove window wiper motor (7) from the frame of the cab.
Refer to Operation and Maintenance, "Window Wipe Motor - Inspect/Replace" for additional information.Installation Procedure
Install window wiper motor (7) on the frame of the cab.
Install the washers and three bolts (6) that hold window wiper motor (7) in position.
Illustration 4 g00641013
Connect wiring harness (8) to window wiper motor (7) .
Illustration 5 g00641011
Connect hose (4) to wiper arm assembly (3) .
Illustration 6 g00641007
Install sheet (1) under the cab. Install the washers and bolts (2) .
Refer to Operation and Maintenance, "Window Wipe Motor - Inspect/Replace" for additional information.