PLATE-DRIVE 1P0469 - Caterpillar

PID 0110 FMI 00Conditions Which Generate This Code:The Engine Control Module (ECM) detects the following conditions:
The C15 engine coolant temperature is greater than 109 °C (228 °F) for more than 10 seconds.
The C13 engine coolant temperature is greater than 107° C (225° F) for more than 5 seconds.
The engine has been running for at least 30 seconds.System Response:"DIAG" will be displayed next to the status for "Engine Coolant Temperature" on the Caterpillar Electronic Technician (ET). The check engine lamp and the warning lamp will illuminate.Note: If a high coolant temperature lamp is installed, the high coolant temperature lamp will turn on instead of the warning lamp.Customer passwords are required to clear this diagnostic code.Possible Performance Effect:The engine will be derated. The engine power and the vehicle speed will be limited. The amount of derate depends on the engine coolant temperature.Note: If the "Engine Monitoring" parameter is programmed to "Warning", the engine power is not affected.Troubleshooting: Test Step 1. Check the Cooling SystemRefer to Testing and Adjusting, "Cooling System - Check".Results:
OK - STOP