1R5851 PLATE Caterpillar parts
312, 312B, 313B, E120B
Rating:
Alternative (cross code) number:
CA1R5851
1R-5851
1R5851
CA1R5851
1R-5851
1R5851
Weight: 1 pounds 0 kg.
EXCAVATOR,
Number on catalog scheme:
21
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1
Do not disconnect the air lines until the air pressure in the system is at zero. If hose is disconnected under pressure it can cause personal injury.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Remove the air pressure from the air tank and drain the coolant from the cooling system.
Illustration 1 g00609682
Typical Example
Disconnect water hose (1) and water hose (3) from the air compressor.
Disconnect air hose (2) and oil hose (4) from the air compressor.
Illustration 2 g00609684
Typical Example
Install Tool (A) and a proper lifting device to the air compressor. The weight of the air compressor is approximately 23 kg (51 lb).
Remove bolt (8) and the clip for the oil hose from the bracket for the air compressor.
Remove two bolts (5) and bolt (6) that fastens the bracket for the air compressor to the cylinder block. Remove bolt (7) and the spacer between the air compressor and the bracket for the air compressor. Remove the bracket for the air compressor.
Illustration 3 g00609686
Typical Example
Use two technicians to support air compressor (10). Remove bolts (9), air compressor (10), and the gasket from the timing gear housing.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 4 g00609686
Typical Example
Install Tool (A) and a proper lifting device to the air compressor. The weight of the air compressor is approximately 23 kg (51 lb).
Inspect the condition of the gasket. Replace the gasket, if necessary. Install the gasket between air compressor (10) and the timing gear housing.
Position air compressor (10) in the front housing. Ensure that the drive gear engages correctly with the gear in the front housing.
Apply 9S-3263 Thread Lock Compound to the threads of two bolts (9). Install two bolts (9). Tighten bolts (9) to a torque of 100 20 N m (75 1
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1
Do not disconnect the air lines until the air pressure in the system is at zero. If hose is disconnected under pressure it can cause personal injury.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Remove the air pressure from the air tank and drain the coolant from the cooling system.
Illustration 1 g00609682
Typical Example
Disconnect water hose (1) and water hose (3) from the air compressor.
Disconnect air hose (2) and oil hose (4) from the air compressor.
Illustration 2 g00609684
Typical Example
Install Tool (A) and a proper lifting device to the air compressor. The weight of the air compressor is approximately 23 kg (51 lb).
Remove bolt (8) and the clip for the oil hose from the bracket for the air compressor.
Remove two bolts (5) and bolt (6) that fastens the bracket for the air compressor to the cylinder block. Remove bolt (7) and the spacer between the air compressor and the bracket for the air compressor. Remove the bracket for the air compressor.
Illustration 3 g00609686
Typical Example
Use two technicians to support air compressor (10). Remove bolts (9), air compressor (10), and the gasket from the timing gear housing.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 4 g00609686
Typical Example
Install Tool (A) and a proper lifting device to the air compressor. The weight of the air compressor is approximately 23 kg (51 lb).
Inspect the condition of the gasket. Replace the gasket, if necessary. Install the gasket between air compressor (10) and the timing gear housing.
Position air compressor (10) in the front housing. Ensure that the drive gear engages correctly with the gear in the front housing.
Apply 9S-3263 Thread Lock Compound to the threads of two bolts (9). Install two bolts (9). Tighten bolts (9) to a torque of 100 20 N m (75 1
Caterpillar parts catalog:
Parts plate Caterpillar catalog:
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 1290T, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 130G, 135H, 135H NA, 1390, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 143H, 14G, ...
14G, 215, 215B, 215C, 215D, 225, 225D, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 24H, 24M, 307C, 311C, 311D LRR, 311F LRR, 312, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 3...
311, 311B, 311C, 312, 312B, 313D2 LGP, 315, 315B, 315B FM L, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318D L, 318D2 L, 320 L, 320N, OEMS
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 307, 307B, 307D, 307E, 308E, 311, 311B, 311C, 312, 312B, 312B L, 312C L, 313B, 314C, 315, 315B, 315B FM L, 315C, 317, 318B, 318C, 319C, 320 L, 320B, 3...
311, 311B, 311C, 312, 312B, 312B L, 312C L, 313B, 314C
311, 311B, 312, 312B, 312B L, 315, 315B, 315B FM L, 315B L, 317, 317B LN
308E, 308E CR, 308E SR, 311, 311B, 312, 312B, 312B L, 315, 315B, 315B FM L, 315B L, 317, 317B LN, 318B
312, 315, 317, 322 FM L, 330, 330 L, 350, 375, 375 L, 5080
311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 316E L, 318B, 318C, 318D...
311, 311B, 311C, 311D LRR, 312, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D ...
311, 311B, 311C, 311D LRR, 312, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D ...
311, 311B, 311C, 311D LRR, 312, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D ...
312, 312B, 312C, 312C L, 313B, 314C, E120B
6I6530
PLATE
312, 312B, 312C, 312C L, 313B, 314C
312, 312B, 312C, 312C L, 313B, 314C
312, 312B, 313B, E120B
7I1084
PLATE-CAM
312, 312B, 313B
312, 312B, 313B
1R5880
PLATE-SEPARATOR
312, 312B, 312C, 312C L, 313B, 314C, E120B
312, 312B, 312C, 312C L, 313B, 314C, E120B
7I1109
PLATE
312, 312B, 313B
312, 312B, 313B
1067023
PLATE
311, 311B, 312, 312B, 315B
311, 311B, 312, 312B, 315B
7Y2436
PLATE
311B, 312, 312B, 315B, 315B FM L, 325 L, 330, 330 FM L, 330 L, 5130, 5130B, 834G, 836G, 938F, 938G, 950G, 950G II, 962G, 962G II, 966G, 966G II, 972G, 972G II, 980G, 980G II, 988G, 993K, IT38F, IT38G,...
311B, 312, 312B, 315B, 315B FM L, 325 L, 330, 330 FM L, 330 L, 5130, 5130B, 834G, 836G, 938F, 938G, 950G, 950G II, 962G, 962G II, 966G, 966G II, 972G, 972G II, 980G, 980G II, 988G, 993K, IT38F, IT38G,...
7I6845
PLATE
311, 311B, 312, 312B, 313B
311, 311B, 312, 312B, 313B
4I6289
PLATE
307, 312, 320C FM, 322 FM L, 325 L, 345B II, 814F, 814F II, 815F, 815F II, 816F II, 824C, 824G II, 825G II, 834G, 834H, 836G, 836H, 844K, 854G, 854K, 938F, 938G, 938G II, 938H, 950G, 950G II, 950H, 96...
307, 312, 320C FM, 322 FM L, 325 L, 345B II, 814F, 814F II, 815F, 815F II, 816F II, 824C, 824G II, 825G II, 834G, 834H, 836G, 836H, 844K, 854G, 854K, 938F, 938G, 938G II, 938H, 950G, 950G II, 950H, 96...
4I6288
PLATE
312, 325 L
312, 325 L
1R5850
PLATE
312, 312B, 313B, E120B
312, 312B, 313B, E120B