PLATE 1T0675 - Caterpillar

Illustration 1 g06041674
Table 1
Specification for Engine Oil Cooler Bypass And Cooling Jet Sequence Valves
Item Qty Part Specification Description
1 - - Tighten the plug to 100 15 N m (74 11 lb ft).
2 2 6B-9202 Spring Length under test force is 68.263 mm (2.6875 inch).
Test force is 84.5 to 99.6 N (19.0 to 22.4 lb).toto
Free length after test is 112.7 mm (4.44 inch).
- - - Cooling jet sequence valves must start to open at a pressure difference of 130 30 kPa (19 4 psi).
Cooling jet sequence valves must be fully open at a pressure difference of 200 30 kPa (29 4 psi).
3 1 2W-1635 Spring Length under test force is 102.0 mm (4.02 inch).
Test force is 518 26 N (116 6 lb).
Free length after test is 143.4 mm (5.65 inch).
- - - Oil cooler bypass valve must open with a pressure difference of 180 20 kPa (26 3 psi).