PLATE-BACKING 1T1629 - Caterpillar

Illustration 1 g00579817
The direction of rotation of the motor is clockwise when the motor is viewed from the drive end.Minimum speed with no load at 20 Volts ... 5500 rpmMaximum speed with no load at 20 Volts ... 7500 rpmThe current consumption at no load is listed below:Minimum current consumption with the solenoid at 20 Volts ... 95 AmperesMaximum with solenoid at 20 Volts ... 120 AmperesClearance between pinion and housing ... 8.3 to 9.9 mm (0.33 to 0.39 inch) (1) Minimum tension of brush spring ... 18 N (4 lb) (2) Torque for the screws that hold the lever to the housing ... 20 3 N m (15 2 lb ft) (3) Torque for the terminal nuts ... 27 34 N m (20 25 lb ft)
Illustration 2 g00579831
The direction of rotation of the motor is clockwise when the motor is viewed from the drive end.Current consumption at 12 Volts with no load and a minimum speed of 3500 rpm. ... 95 Amperes maximum (1) Torque for housing bolts ... 11 N (2.5 lb) (2) Torque for terminal nuts ... 27.0 to 33.8 N m (20.0 to 25.0 lb ft) (3) Clearance between the pinion and the housing ... 0.51 to 1.27 mm (0.02 to 0.05 inch)Starter Solenoids
Delco-Remy
Illustration 3 g00587211
Current DrawThe current that pulls in the windings at 5 volts is the following value. ... 9 to 11.5 AmperesThe current that pulls in the windings at 20 to 24 volts is the following value. ... 40 to 55.2 AmperesAt 20 to 24 volts, the following current will hold the windings. ... 6.8 Amperes maximumPrestolite
Illustration 4 g00587217
Current draw at 21 °C (70 °F)The current that pulls in the windings at 12 volts is the following value. ... 23.2 to 26.6 AmperesAt 12 volts, the following current will hold the windings. ... 4.1 to 4.8 amperes