PLATE 2010126 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     -     Loctite High Flex Form-In-Place Gasket     -    
B     4C-9507     Retaining Compound     1    
Illustration 1 g01040677
Apply Tooling (A) to the mounting surface of differential and bevel gear housing (1) .
Attach a suitable lifting device onto the differential and bevel gear housing (1) . The weight of differential and bevel gear housing (1) is approximately 64 kg (141 lb). Install the differential and bevel gear housing (1) into the axle housing. Apply Tooling (B) to the threads of bolts (2) . Install bolts (2) . Tighten bolts (2) to a torque of 169 9 N m (125 6 lb ft).End By:
Install the axle shafts. Refer to Disassembly and Assembly, "Axle Shaft - Remove and Install".
Install the drive and steering axle onto the machine. Refer to Disassembly and Assembly, "Drive and Steering Axle (Front) - Install".