PLATE AS 2027985 - Caterpillar

Illustration 1 g03317865
Table 1
Specification for 296-3250 Hydraulic Cylinder Gp    
Item     Qty     Part     Specification Description    
1     1     7Y-2396 Bushing     Bore before assembly is
90.27 0.02 mm (3.554 0.001 inch).
Installation depth is
10.0 0.3 mm (0.39 0.01 inch).    
A     1     198-7216 Cylinder As     Bore is
130.00 0.10 mm (5.118 0.004 inch).    
B     1     198-7238 Rod and Bearing As     Diameter is
69.93 0.03 mm (2.753 0.001 inch).    
C     1     120-6301 Head     Bore over two lands is
70.53 0.03 mm (2.777 0.001 inch).    
2     8     9X-2404 Bolt     Torque to
600 70 N m (443 52 lb ft).    
3     1     7Y-2397 Bushing     Bore before assembly is
100.29 0.02 mm (3.948 0.001 inch).
Installation depth is
10.0 0.3 mm (0.39 0.01 inch).    
4     1     114-0753 Bushing     Outside diameter is
75.120 0.025 mm (2.9575 0.0010 inch).
Thickness is
2.475 0.025 mm (0.0974 0.0010 inch).    
5     1     170-9841 Buffer Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
6     1     170-9857 U-Cup Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
7     1     165-9283 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed.
Before assembly, apply green Loctite 609 to the wiper seal groove.    
8     1     9X-3595 Seal As     Lubricate the inside diameter and the outside diameter with the clean grease.    
9     2     179-9771 Ring     Lubricate the inside diameter and the outside diameter with the clean grease.    
10     1     150-5884 Ring     Lubricate the inside diameter and the outside diameter with the clean grease.    
11     1     183-8994 Piston     Lubricate the face and the thread with 309-6932 Hydraulic Oil all around.
Torque to
1000 100 N m (738 74 lb ft).