2035368 PLATE AS Caterpillar parts
322C, 322C FM, 325C, 325C FM, 325C L, M325C MH
Rating:
Alternative (cross code) number:
CA2035368
203-5368
2035368
CA2035368
203-5368
2035368
Weight: 25 pounds 11 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 2035368:
Number on catalog scheme:
3
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Remove " for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g03010798
Support crankshaft (4) on a suitable stand.
Remove Torx screws (1) from crankshaft timing ring (2). Do not reuse the Torx screws.
Carefully remove crankshaft timing ring (2) from crankshaft (4). Note: Ensure that the seal surface on adaptor (5) is not damaged when the crankshaft timing ring is removed.Note: Do not remove dowel (3) from the crankshaft unless the dowel is damaged.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the teeth of the crankshaft timing ring are clean and free from damage.
Support crankshaft (4) on a suitable stand.
Illustration 2 g03010798
If dowel (3) was removed, install a new dowel to crankshaft (4).
Position crankshaft timing ring (2) onto the crankshaft with the chamfer toward the crankshaft web. Align the hole in crankshaft timing ring with dowel (3) in the crankshaft. Carefully install the crankshaft timing ring to the crankshaft. Note: Ensure that the seal surface on adaptor (5) is not damaged when the crankshaft timing ring is installed.
Install new Torx screws (1). Tighten the Torx screws to a torque of 10 N m (89 lb in). End By:
Install the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Install " for the correct procedure.
Start By:
Remove the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Remove " for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g03010798
Support crankshaft (4) on a suitable stand.
Remove Torx screws (1) from crankshaft timing ring (2). Do not reuse the Torx screws.
Carefully remove crankshaft timing ring (2) from crankshaft (4). Note: Ensure that the seal surface on adaptor (5) is not damaged when the crankshaft timing ring is removed.Note: Do not remove dowel (3) from the crankshaft unless the dowel is damaged.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the teeth of the crankshaft timing ring are clean and free from damage.
Support crankshaft (4) on a suitable stand.
Illustration 2 g03010798
If dowel (3) was removed, install a new dowel to crankshaft (4).
Position crankshaft timing ring (2) onto the crankshaft with the chamfer toward the crankshaft web. Align the hole in crankshaft timing ring with dowel (3) in the crankshaft. Carefully install the crankshaft timing ring to the crankshaft. Note: Ensure that the seal surface on adaptor (5) is not damaged when the crankshaft timing ring is installed.
Install new Torx screws (1). Tighten the Torx screws to a torque of 10 N m (89 lb in). End By:
Install the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Install " for the correct procedure.
Caterpillar parts catalog:
Parts plate Caterpillar catalog:
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 307, 307B, 307D, 307E, 308E, 311, 311B, 311C, 312, 312B, 312B L, 312C L, 313B, 314C, 315, 315B, 315B FM L, 315C, 317, 318B, 318C, 319C, 320 L, 320B, 3...
311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 313D2 LGP, 314C, 314D LCR, 314E CR, 314E LCR, 315, 316E L, 320D...
115, 312, 315, 315C, 317, 318B, 318C, 319C, 319D, 319D LN, 320 L, 320B, 320C, 320C L, 320D, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321C...
315, 317, 320 L, 320B, 320C, 322B, 322B L, 322B LN, 322C, 325B, 325B L, 325C, 330, 330B L, 365B II, 365C, 365C L
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 320B, 321B, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B, 325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330C L, 330D FM, 330D...
311C, 313D2 LGP, 315C, 315D L, 316E L, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 3...
311C, 313D2 LGP, 315C, 315D L, 316E L, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 3...
225, 227, 235, 235B, 235D, 245, 320B FM LL, 325B L, 325C, 330B L, 330C L, 5130, 5130B, 5230, 5230B, 539, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 631E, 631G, 633E II, 637E, 637G, 69D, 769...
318C, 320C, 325C, 330C, 345B II, 5110B, 938G II, 950G II, 962G II, 966G II, 972G II, 980G II
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D M...
115, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325B L, 325C, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330, 330 L, 330B, 330B L, 330C, 330C L, 330D, 330D L, 330...
325C, 328D LCR, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L
1968770
PLATE
322C, 322C FM, 325C FM
322C, 322C FM, 325C FM
1848795
PLATE AS
322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325C L, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 329D, 329D L, 329D LN, M325C MH, M325D L MH, M325D MH
322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325C L, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 329D, 329D L, 329D LN, M325C MH, M325D L MH, M325D MH
1930374
PLATE
1090, 1190T, 2290, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 325C FM, 325C L, 325D FM, 325D FM LL, 511, OEMS, TK711
1090, 1190T, 2290, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 325C FM, 325C L, 325D FM, 325D FM LL, 511, OEMS, TK711
1214969
PLATE AS
322B, 322B L
322B, 322B L
1214967
PLATE AS
322B, 322B L
322B, 322B L
1214933
PLATE AS
320B, 322B, 322B L, 322B LN
320B, 322B, 322B L, 322B LN
2133356
PLATE AS
322C, 322C FM, 325C FM
322C, 322C FM, 325C FM
2128158
PLATE AS
322C, 322C FM, 325C FM
322C, 322C FM, 325C FM
2128157
PLATE AS
322C, 322C FM, 325C FM
322C, 322C FM, 325C FM
2128156
PLATE
322C, 322C FM, 325C FM
322C, 322C FM, 325C FM
2099999
PLATE
322C, 322C FM, 325C FM
322C, 322C FM, 325C FM
2083955
PLATE AS
322C, 322C FM, 325C, 325C FM, 325C L, M325C MH
322C, 322C FM, 325C, 325C FM, 325C L, M325C MH