2144532 PLATE-INSTRUCTION Caterpillar parts
311D LRR, 312D, 312D L, 312D2, 314D CR, 314D LCR, 314E LCR, 315D L, 318D2 L, 319D L, 319D LN, 320C, 320D, 320D LRR, 320D RR, 320D2 L, 321D LCR, 322C, 324D, 324D L, 325C, 325D, 325D L, 329D, 329D L, 33...
Rating:
Alternative (cross code) number:
CA2144532
214-4532
2144532
CA2144532
214-4532
2144532
Weight: 0.02 pounds 0 kg.
EXCAVATOR,
Compatible equipment models: 2144532:
Number on catalog scheme:
4
For full view, you need register
Cat SIS web machinery list:
Information:
Reset - The trip totals can be reset in the display by selecting the reset icon. Average Fuel Rate - Displays the calculated hourly fuel consumption rate of the machine since the last trip reset.Total Fuel - The Total Fuel displays the total fuel used since the last trip reset. This display includes fuel used by both the engine and aftertreatment system. Idle Fuel - Displays the total fuel consumed during idle conditions since the last trip reset.Idle Time - Displays the number of operating hours where the machine was in an idle condition since the last trip reset.Operating Hours - Displays the number of hours that the machine has been operating since the last trip reset.Odometer - Displays the total distance the machine has driven in forward/reverse gear since the last trip reset.Service
Service Screen - The Service screen allows the operator or service technician to change more advanced machine configurations or perform various calibrations. Some screens in the Service Menu are password protected for the service technician. Consult your Cat dealer for information about the service menu options.The Service Menu is arranged in five different areas:
Diagnostics
Configurations
Calibrations
ECM Summary
Service ModeDiagnostics
Diagnostics menu - The Diagnostics menu option provides the operator or technician a list of any active or logged diagnostic codes or events that have occurred on the machine. To view additional details of a particular code, use the up or down arrows at the top of the screen to highlight the desired code then select "OK".Configurations
Configurations Menu - The configurations menu option allows the operator or technician to change the advanced operational settings of the major systems. The menu organizes the systems into the following categories:
MachineAdditional configuration option menus may be available if certain features are installed on the machine.Machine
Auto Rear WiperAllows the operator to ENABLE or DISABLE the automatic rear wiper feature. The feature will automatically engage the rear window wiper when the machine is placed in reverse and the front wiper is activated.
BeaconAllows the operator to ENABLE or DISABLE the beacon feature. The feature allows for the beacon power connector to be controlled by the button on the keypad.Calibrations
Calibrations Menu - The calibrations menu option allows the operator or technician to perform various calibrations on the machine without the need for a service tool. The default calibrations present on the machine must be enabled via the service mode. Additional non-password protected calibration option menus may be available if certain features are installed on the machine.ECM Summary
ECM Summary - The ECM Summary menu allows the operator or technician to view the ECM information. Software and hardware information is provided for the various electronic control modules installed on the machine. Engine
Electronic Control Module (ECM) Serial Number
Hardware (HW) Part Number
Software (SW) Part
Service Screen - The Service screen allows the operator or service technician to change more advanced machine configurations or perform various calibrations. Some screens in the Service Menu are password protected for the service technician. Consult your Cat dealer for information about the service menu options.The Service Menu is arranged in five different areas:
Diagnostics
Configurations
Calibrations
ECM Summary
Service ModeDiagnostics
Diagnostics menu - The Diagnostics menu option provides the operator or technician a list of any active or logged diagnostic codes or events that have occurred on the machine. To view additional details of a particular code, use the up or down arrows at the top of the screen to highlight the desired code then select "OK".Configurations
Configurations Menu - The configurations menu option allows the operator or technician to change the advanced operational settings of the major systems. The menu organizes the systems into the following categories:
MachineAdditional configuration option menus may be available if certain features are installed on the machine.Machine
Auto Rear WiperAllows the operator to ENABLE or DISABLE the automatic rear wiper feature. The feature will automatically engage the rear window wiper when the machine is placed in reverse and the front wiper is activated.
BeaconAllows the operator to ENABLE or DISABLE the beacon feature. The feature allows for the beacon power connector to be controlled by the button on the keypad.Calibrations
Calibrations Menu - The calibrations menu option allows the operator or technician to perform various calibrations on the machine without the need for a service tool. The default calibrations present on the machine must be enabled via the service mode. Additional non-password protected calibration option menus may be available if certain features are installed on the machine.ECM Summary
ECM Summary - The ECM Summary menu allows the operator or technician to view the ECM information. Software and hardware information is provided for the various electronic control modules installed on the machine. Engine
Electronic Control Module (ECM) Serial Number
Hardware (HW) Part Number
Software (SW) Part
Parts plate Caterpillar catalog:
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
324D L, 325D L, 328D LCR, 329D L, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LN, 340D L, 340D2 L, 345B II, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, ...
324D, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E L, 336E LN, 336F L, 340D L, 340D2 L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L,...
325, 325 L, 325 LN, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 3...
330C, 330C FM, 330C L, 330C MH
345C, 345C L, 345C MH, 345D L, 365B, 365B II, 365B L, 365C, 365C L, 385B, 385C, 385C L, PIN GRAB, W345C MH
325C, 328D LCR, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L
325C, 328D LCR, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L
330D L, 330D LN, 330D MH, 345B, 345B II, 345B II MH, 345B L, W345B II
345B II, 345B II MH, 345B L, W345B II
345B II, 345B II MH, 345B L, W345B II
345B II, 345B II MH, 345B L, W345B II
2144531
PLATE-INSTRUCTION
311D LRR, 312D, 312D L, 312D2, 314D CR, 314D LCR, 314E LCR, 315D L, 318D2 L, 319D L, 319D LN, 320C, 320D, 320D LRR, 320D RR, 320D2 L, 321D LCR, 322C, 324D, 324D L, 325C, 325D, 325D L, 329D, 329D L, 33...
311D LRR, 312D, 312D L, 312D2, 314D CR, 314D LCR, 314E LCR, 315D L, 318D2 L, 319D L, 319D LN, 320C, 320D, 320D LRR, 320D RR, 320D2 L, 321D LCR, 322C, 324D, 324D L, 325C, 325D, 325D L, 329D, 329D L, 33...
2269258
PLATE
311D LRR, 312D, 312D L, 314D LCR, 315D L, 319D L, 320D, 323D L, 323D LN, 323D SA, 324D, 324D L, 325D L, 329D L, 330D L, 336D, 336D L, 345C, 345D, 345D L, 365C, 365C L, 385C, 385C L
311D LRR, 312D, 312D L, 314D LCR, 315D L, 319D L, 320D, 323D L, 323D LN, 323D SA, 324D, 324D L, 325D L, 329D L, 330D L, 336D, 336D L, 345C, 345D, 345D L, 365C, 365C L, 385C, 385C L
2735360
PLATE-RUBBER
315D L, 319D L, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 320D2 L, 323D L, 324D, 324D L, 324D LN, 325D, 325D L, 329D L, 330D L, 330D LN, 336D, 336D L, 336D2, 336D2 L, 345C, 345C L, 345D, 345D L, 349D,...
315D L, 319D L, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 320D2 L, 323D L, 324D, 324D L, 324D LN, 325D, 325D L, 329D L, 330D L, 330D LN, 336D, 336D L, 336D2, 336D2 L, 345C, 345C L, 345D, 345D L, 349D,...
2735359
PLATE-RUBBER
315D L, 319D L, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 320D2 L, 323D L, 324D, 324D L, 324D LN, 325D, 325D L, 329D L, 330D L, 330D LN, 336D, 336D L, 336D2, 336D2 L, 345C, 345C L, 345D, 345D L, 349D,...
315D L, 319D L, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 320D2 L, 323D L, 324D, 324D L, 324D LN, 325D, 325D L, 329D L, 330D L, 330D LN, 336D, 336D L, 336D2, 336D2 L, 345C, 345C L, 345D, 345D L, 349D,...
2851337
PLATE-STOP
311D LRR, 312D, 312D L, 315D L, 319D, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D L, 324D LN, 325D, 325D L, 328D LCR, 329D, 329D L, 329D LN, 330D L,...
311D LRR, 312D, 312D L, 315D L, 319D, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D L, 324D LN, 325D, 325D L, 328D LCR, 329D, 329D L, 329D LN, 330D L,...
3639550
PLATE AS
315D L, 318D L, 319D L, 319D LN, 320D, 320D FM, 320D L, 320D LN, 320D2 L, 323D L, 323D2 L
315D L, 318D L, 319D L, 319D LN, 320D, 320D FM, 320D L, 320D LN, 320D2 L, 323D L, 323D2 L
3118419
PLATE-INFORMATION
319D L, 319D LN
319D L, 319D LN
2838899
PLATE & FILM GP
319D, 319D L, 319D LN
319D, 319D L, 319D LN
3371248
PLATE AS
319D L, 319D LN
319D L, 319D LN
2852441
PLATE
319D, 319D L, 319D LN
319D, 319D L, 319D LN
2623552
PLATE
319D, 319D L, 319D LN
319D, 319D L, 319D LN
312E, 319D, 319D L, 319D LN, 320C, 320D LRR, 320D RR, 320E LRR, 320E RR, 321C, 321D LCR, 328D LCR, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E ...