PLATE AS 2187130 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 189-0410 Shackle As 2 Start By:
Install the body retaining pin. Refer to Disassembly and Assembly, "Pin (Body Retaining) - Remove and Install".
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components.To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly.Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination.
Drain the fuel into a suitable container for storage or disposal.
Illustration 1 g01316818
Remove bolts (2) and disconnect guard (1).
Illustration 2 g01316832
Disconnect hose assemblies (3). Remove cable strap (4).
Illustration 3 g01316833
Disconnect harness assembly (5). Reposition harness assembly (5) out of the way.
Illustration 4 g01316835
Attach Tooling (A) and a suitable lifting device to fuel tank (6). The weight of fuel tank (6) is approximately 295 kg (650 lb).
Illustration 5 g01316836
Remove U-bolts (7) and nuts (8).
Illustration 6 g01316895
Remove bolt (9). Remove fuel tank (6).